Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Heat only boiler sizing in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

hammers4spanner

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
7,712
Current in situ is an Ideal classic.

Need something sized near as possible to this model due to space.
 
baxi 400, worcester ri, viessmann 100

what you tight on width?
 
They have granit stone everywhere and where gas pipe comes out below old boiler it can' be moved.
 
baxi 400 sizes

Overall Height (Inc Flue) 790mm
Casing Width - 370mm
Casing Depth - 270mm
gas connection right (as you look at boiler)

worcester ri

Overall Height (Inc Flue) 780mm
Casing Width - 390mm
Casing Depth - 270mm
gas connection Left (as you look at boiler)

viessmann 100

Overall Height (Inc Flue) 800mm
Casing Width - 375mm
Casing Depth - 285mm
gas connection Left (as you look at boiler)
 
What about a Vaillant 4 series??

as its you :D

vaillant 400

Overall Height (Inc Flue) 885mm
Casing Width - 440mm
Casing Depth - 316mm
gas connection Right (as you look at boiler)
 
How about the Ecofit range? . I would check but still working:confused::confused:

eco fit

Overall Height (Inc Flue) 752mm
Casing Width - 375mm
Casing Depth - 280mm
gas connection Right (as you look at boiler)
 
8.40pm on a friday Harvest not good bud should have your feet up and be on your second pint by now ha ha good luck bud . baxi 400 piece a Sod to fit light as a feather and reasonably priced
 
what you doing harv
 
8.40pm on a friday Harvest not good bud should have your feet up and be on your second pint by now ha ha good luck bud . baxi 400 piece a **** to fit light as a feather and reasonably priced
what you doing harv
Talking to a customer about a bathroom I am fitting for them. I then look down and two hours have disappeared. Got one of these now though.

ACB20315-8375-42E3-983F-1D6C8B49ECE7.jpeg
 
Status
Not open for further replies.

Reply to Heat only boiler sizing in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi All, Looking for a recommendation for a heat only boiler to replace my 30yrs old ideal boiler. Any makes you would recommend and any to avoid...
Replies
5
Views
497
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no...
Replies
6
Views
254
I just had a quote for a new boiler install as follows I dont undertand why a 15-60 boiler pump is needed and a 25-100 pump is needed as well I...
Replies
3
Views
577
A (if) CH system has a very high head loss due to improperly sized pipework and long runs and possibly partially blocked pipes and requires a UPS2...
Replies
16
Views
1K
Hello, I am looking for a heating engineer to diagnose and resolve an issue with my Vaillant EcoTec 832 combi boiler. Job Location: Copeland Rd...
Replies
1
Views
422
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock