Discuss Please help, pressure low. in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Have had a look, and there is non that link together. That’s the confusing part. Any ideas please?As you look under the boiler you will see 2 black dials that link together, that is your filling loop all you need to do is turn them both and your boiler should fill up, once you reach 1 to 1.5 bar turn them off, but I would have you boiler checked by a registered engineer as it looks like you might have a leak as there is some corrosion under the boiler.
Thank you mate, the one on the right is turned on already. When I trun the left nothing happens. Am hoping a turning the right knob. The two black ones.directly below the boiler on the right hand side i have circled on the picture.
View attachment 32128
One dose not move at all. Right as your looking at it.do the knobs open fully then stop turning or do they carry on turning?
the left should turn anti clockwise and the right clockwise
Didn’t think of that. Cheers Watson.Undo the screw which holds the handle on pull it off and use a small adjustable spanner to turn the filling loop valve on you should hear it filling
Reply to Please help, pressure low. in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.