Replacing Programmer

[PlumbBobBob]

that's what we are here for

 

[Ads]

Sorry for hijacking a thread. But I just wondered what the different "jumpers" are for. Obviously the 1 and 7 jumper is for the 7 day programming. I am guessing the P and G jumper is for pump or Gravity fed. But what is the L jumper for?

Many thanks

 

[Carlos_UK]

Hi Ads,

Not sure what the L stands for, maybe linked?

But basically, it sets whether you can program the heating and hot water to come on at different times to each other or not.

Carlos.

 

[Ads]

Hi Ads,

Not sure what the L stands for, maybe linked?

But basically, it sets whether you can program the heating and hot water to come on at different times to each other or not.

Carlos.

Thanks, I'll leave well alone, but just wondered.
cheers

 

[Jimbo-74]

If you have a mid position valve and can't get independent control, it is wired wrong.

Hi

when I have my hot water on the heating comes on.
This has only just happened.

I have a mid position valve would this be stuck or broken and need replacing?

 

[Aquazone]

You should have probably started a new thread mate, as more people may comment on it. Sounds like the 3 port is stuck or damaged. Can you post a picture of it, and we may be able to advise more?

Some valves you can remove the actuator head and free the spindle to move fully, but if the pendulum ball (only way I can describe it) inside is damaged, then you will need a new valve.

 

[Catherineohara]

I have a salus single/two channel programmer put the heating on manually yesterday for two hours .It came on for the two hours but when it went off it did not come on again looks as if the programmer has no power will not switch on

 

[SimonG]

Please register and start new thread to receive replies.

 

[rpm]

I have a salus single/two channel programmer put the heating on manually yesterday for two hours .It came on for the two hours but when it went off it did not come on again looks as if the programmer has no power will not switch on

Hi Catherine, wouldn`t be powered by a battery would it?

Really need you to register and start your own thread that way your liable to get a better response.

 

[Dotty]

As above.