Discuss Replace Aqualisa Quartz in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Oops! :p Maybe he was.
I didn’t think on that possibility!

..otherwise it looks a perfect install
Far from perfect, the insulation round the cable is cut too far back, There's a clear line about 50mm below the earth connection stating not to strip back the insulation below that point. Also no silicone round the screws or the hole where the pipe and cable come through the wall. The shower hose is also not within the retaining ring, but we can't blame the installer for that as it's usually the first thing the customer does ;)
 
Triton T80z fast fit would do the job never been a fan of aqualisa . Kop

Screenshot_20190417-075644.png
 

Reply to Replace Aqualisa Quartz in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

    • Like
Hi, I thought I'd share my experience of dealing with Aqualisa about their Quartz Digital Diverter. When selecting the slider rail handset the...
Replies
1
Views
282
I have holes in the wall of my shower enclosure. Down low at the open corner, between the quartz wall and the solid pan. Same at each end of the...
Replies
1
Views
240
Hello all, So been having somewhat of a time with my Aqualisa Quartz 9.5 electric shower. A few.month ago I put up with a few problems it was...
Replies
6
Views
482
I have an old Aqualisa A2 processor and am doing a refit. I would like to add a digital diverter, but not sure if they are compatible. So first...
Replies
0
Views
914
Hi and thanks for the welcome to the forum. I am a DIYer and need to take off and reinstall my Aqualisa Aquastream to remove the tiles before...
Replies
5
Views
406
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock