From the United States of America? - Checkout our specific plumbing forum for you:USA Plumbing Forum

Discuss Two seperate manifolds on two floors in the Water Underfloor Heating Installations area at PlumbersForums.net

Hi

I installed ufh on two floors. My question is can I run two manifolds on two floors with one pump and mixing shunt?

How do I go about connecting the manifolds together, do I run a T straight after the pump before it enters the first manifold or do I connect the second manifold after it enters the first manifold?
 
This is what it says on danfoss website about the mixing shunt.

"These are designed for 1 to 3 floor heating circuits and contain both a small mixing shunt as well as 1, 2 or 3 group manifolds"

According to this its possible. Or am I misunderstanding?
 

Uheat – Jake

Official Sponsor
What sizes are the manifolds? If they're under 12 ports in total you could run the system off one pump and have a T after the pump going to each manifold.
 
What sizes are the manifolds? If they're under 12 ports in total you could run the system off one pump and have a T after the pump going to each manifold.
Ones a 5 port and the others a 6
Post automatically merged:

Ones a 5 port and the others a 6
Should I put the pump upstairs? Do I run it with a T after the pump or from the end of the manifold to the beginning of the other.
 
Bulk Workwear - Workmans Clothing and Protective Gear
This official sponsor may provide discounts for members

Reply to Two seperate manifolds on two floors in the Water Underfloor Heating Installations area at PlumbersForums.net. Plumbing questions, answers, tips and tricks.

Plumbing and Plumbers

Plumbing Workwear

Shower Power Booster

Plumbase Spares - Plumbing Supplies and Spare Parts

Water Underfloor Heating

CORGI Direct for Plumbers

The Wetroom Store

Plumbase Spares

New Posts Threads Members

Top