problem with repressurising IDEAL instinct 24

[bauhaus]

Hi everyone I moved into a new house there is not heating because the pressure is too low I tried to repressurising it by opening the blue and black taps nothing happened no water noise nothing. can anyone tells me what to do? i feel a little bit embarassed as it shoulb be something very easy to do. Thanks a lot

[/IMG]

 

[bauhaus]

 

[Vee]

Pressure needs to be at 1 bar. You need to find the braided hose to connect the filling link valves together, otherwise no water will go in. Also p​

ress override button on your wireless thermostat relay to check the heating comes on. (Bottom left corner of picture) If the bottom neon stays red even when the top one goes green you may need to replace the batteries in the receiver unit in hall or wherever it may be?

 

[bauhaus]

thank you for the answer I've just replaced the batteries and the bottom led still red

 

[Vee]

Does it come on if you press the override button below? It may need rebinding. The controllers loose touch if batteries run too low for too long. Honeywell instructions are available online. Is there another programmer somewhere? Boiler front? Does hot water work ok?

 

[bauhaus]

the hot water works the top led goes green when I press the override button do I have to buy a braided hose?

 

[Tomzas]

Yeah you can but a filling loop from plumbers merchants but I would ask previous owners if they know where it may be

 

[jtsplumbing]

They have either left you a hose to link the 2 chrome valves together (Black leavers) or a small copper link that go's between the black/blue leavers under the boiler, have a look on top of boiler may be something on there,

 

[bauhaus]

thank you mates there is pressure in the boiler now I made a re-biding on the thermostat the led on the receiver is green and the screen of the unit in the hall shows a flame BUT still NO heating working the screen of the boiler shows only hotwater mode .. headaches

 

[Harvest Fields]

Do you have a switch/dial on the front of the boiler for summer mode(hot water only)?

 

[bauhaus]

yes I have it is on the winter mode

 

[Harvest Fields]

Any chance of a few pictures. Pressure gauge/ receiver for stat/thermostat/controls on front of boiler please.

 

[bauhaus]

 

[bauhaus]

the pressure just below 1.5

 

[Harvest Fields]

Turn the centre dial on the integral timer to the left one click. Heating should come on.