Feed and Vent fun :DDDDD

[ShaunCorbs]

OK, looks like you have about 1.2m opening the valve on your rig. There should be more than that when installed.

86cm

 

[Vee]

It will work fine even with less.

 

[ShaunCorbs]

Job done I think it looked ok

Took 5 hours to fill tho (due to no head f and e tank about 2" above the rads)

 

[Vee]

System Boiler?

 

[ShaunCorbs]

System Boiler?

heat only

 

[fixitflav]

Job done I think it looked ok

Took 5 hours to fill tho (due to no head f and e tank about 2" above the rads)

Looks nice! Does everything work OK?

 

[ShaunCorbs]

Looks nice! Does everything work OK?

Yep

 

[chris watkins]

I'd like to think pushfit can with Stand 1bar!! Although I dispise the stuff.

3bar @ 82deg C otherwise it should not be used.
No one seems to pressure test anything anymore, testing systems using A or B testing method should identify any poorly made joints because the both involve reducing the pressure below working.

 

[Vee]

heat only

I’d recommend an expansion vessel & blow off as its a sealed system.

 

[sammathias]

I’d recommend an expansion vessel & blow off as its a sealed system.

Can you not see the massive expansion vessel in his picture then no?