Search the forum,

Baxi neta tec over-pressurising

Discuss Baxi neta tec over-pressurising in the Gas Engineers Forum area at PlumbersForums.net

M

MethodPH

Messages
37
Got a customer with no hot water or heating topped pressure up and was fine on hot water. Put it on heating and pressure goes from 1.2 bar to 2.8 bar in no time at all. I’ve heard about faulty expansion vessels with these. Any ideas? I’m fairly new gas safe engineer and mainly do installs. Any help here would be greatly appreciated, still learning
 
I did post there with details on the job because I thought this had been re-posted in Gas engineers only forum page.
I see it isn't and you aren't down as Gas Safe registered?
See Shaun or other mod to gain access.
 

Reply to Baxi neta tec over-pressurising in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

C
Y Plan, no hot water but heating is working when called
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
250
John.g
J
F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
117
Lou
Lou
M
Central heating losing pressure all the time
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
120
fowlerboi
F
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
317
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock