Discuss Bath and basin waste combined on new build in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
910
Hi if combining a bath and basin waste on a new build should you really run 2 inch and reduce to 1.5 inch after the tee to the basin?
 
shouldnt realy be combining them but new builds dont seem to worry about it, yes to pipe sizesi would run it all in 2 inch and reduce close to bath and run 1.5 up to the basin reduce close to trap
 
you could run 2" , i would just use 1 1/2" then reduce to 1 1/4 on the elbow comming through the stud or what ever to basin, you might need an anti vac trap on basin,
 
It's not ideal but sometimes builders put soils into stupid places and bossing 2 wastes out can be impossible. You can consider short boss in soil boxing and run up into floor? Either way stick to max lengths for each size.
 
I would really try to separate them if possible. It rarely works well, joined together. Always blocks up and loses trap seals
 
Status
Not open for further replies.

Reply to Bath and basin waste combined on new build in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock