You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
replace
In computing, replace is a command that is used to replace one or more existing computer files or add new files to a target directory. Files with a hidden or system attribute set cannot be replaced using replace. The command lists all files that are replaced.
Hello all,
I currently have a gravity hot water system - with a 110x60x60cm water tank and a small one (expansion vessel?) in the loft, the water pressure in the bathrooms (3 on first floor) are very poor, especially the master bedroom en-suite (the furthest way from the cold water tank) which...
Sup9
Thread
advise
gravity
hot
hot water
hot water system
ideas
please
replace
system
water
Hi guys.
I was tasked with fitting a new fill-valve to a customer's cistern, whilst I was decorating the place.
That part went fine (no leaks from cistern) but I cannot now get a good seal on the joint from the shank of the fill-valve to the old pipework.
There was no leak there before I...
Hi All,
I know there are many posts on here asking for advice on 'which new boiler should I get', so hoping you can put up with the tedious subject one more time and help me out
Needing to replace an old Vokera Syntesi 25e so I've had a couple of local companies round to give me a quote, and...
gseaman
Thread
another
boiler
help
new boiler
oil
old
price
question
quote
replace
survey
vokera
Sorry but I'm bit of a novice on these things.
I have a 7 yr old Greenstar Ri conventional boiler with hot water tank in my new house.
When fitted, they wired next to the boiler a Potterden ep2002. This switch is a bit limited in what it can do. You cannot independently have different CH and HW...
I think the actuator on our MA1/679 is faulty/sticking, but am not sure how to get it off to replace it. It was fitted so that it is touching one of the pressure vessels. The leaflet left by the plumber doesn't really help.( I tried to post a link to a pdf of it here, but the forum doesn't...
I'm replacing the PRV on a Worcester 28 CDi, but the space between the red cap and the side of the boiler housing is only about 5mm. The o-ring PRV body is inserted approximately 12mm in to the clipped housing.
Does it slide out when the union is unbolted or is there further dis- assembly...
i have a faulty ups2 15-50/60 going back and wondering if i can replace with an alpha2 which is gonna cost roughly £10 more. I am thinking even though alpha2 may be overpowered for my size of house, it will save money by being more efficient?
house is 4 bed with approx 15 rads and the ups2 was...
Hi,
I have a 12-year old combination boiler that has been leaking water for the past few months. In recent weeks the leaking has increased.
I got a plumber in to look at it, and he said it was leaking in 3 places, and would cost £200 for parts to fix the leaks, £200 labour, and £300 to
replace...
My house was built in 1966 as a 2 bed bungalow. An oil-fired Aga with back boiler heated the water in a vented cylinder. The Aga was removed, leaving an immersion heater to heat the tank.
A dormer conversion (2 beds and a shower room) was done about 13 years ago by a previous owner, and central...
clockworks
Thread
boiler
cylinder
feeding
immersion
indirect
mains
replace
tank
unvented
vented
Hi, I have two Geberit concealed cisterns and both are leaking when flushed. I have bought replacement seals for both ends of the outlet pipe, but how do I change the one on the cistern end ? Could anyone enlighten me please ?
When I replaced the flush seal (the which blisters) I seem to...
paulbhalton
Thread
change
cistern
concealed
concealed cistern
flush
geberit
outlet
replace
seal
toilet
years
My son had a full coverage BG service contract. After a routine service visit some monthe back they mumbled something about sludge, then soon after, without prior warning, downgraded his cover to exclude rads. and pipework, and without telling him they had done so. Now months later the hot...
Hi,
I am new to the forum and hope you can help me. We have H&C m0204 lever taps in the kitchen and it has started to drip and I need to replace the cartridges but for the life of me don't know how to get to them as always had standard taps before. And the counter staff at screwfix were no help...
My first post. I'm not a plumber etc but do have some understanding of how these things work.
Our Worcester Hi Flow is getting rather long in the tooth. It should have been replaced but still works pretty well really but will be replaced some time early next year.
Since Bosch took over they...
a.john
Thread
boiler
flow
replace
similar
something
store
system
water
worcester
Hello Everyone!
I am very new to plumbing :)
I am trying to open the kitchen mixer tap faucet, to replace the aerator, but its too jammed to open. I tried using this tool - https://www.savewatersavemoney.co.uk/products/view/744/tap-inserts-twin-pack.html, but didn't help.
I tried the regular...
Hi Guys/gals, i know the subject of repair or replace old boilers is a very divisive matter.
Some engineers will always repair and others will advise to replace.
I have to attend a Vokera 80sp on Wednesday to diagnose a problem with intermittent hot water.
i have a few preconceived ideas of...
Hi, I will need to drain down the CH system to install a complete new Sunvic motorised 3 way valve assembly. The only drain tap I can find is on the pipework adjacent to the bathroom radiator. This radiator is permanently hot whenever the hot water system is activated--whether the CH is 'on' or...
duttonmark
Thread
complete
draining
heating
heating system
replace
sunvic
system
valve
How do i replace the circuit board with a modified board on a thermo classic f35 suanier duval ?
what is the configuration of the molex plugs on the right hand side of the new modified boards?
Hello,
We're in the midst of a kitchen refurb and as to be expected, unexpected issues have occurred. We were not planning to need any major plumbing work, just a new sink fitted which we planned to do DIY.
However our builder has since drilled through the pipe running from the boiler upstairs...
Hi all,
Recently had some hot and cold water pipes installed, and they look a bit "green" (and leaky), here are some photos.
What do you think, repair or replace?
Hot water pipe junction:
Shower pipes:
Any advice welcome!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.