You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
notify
A vertical service code (VSC) is a sequence of digits and the signals star (*) and number sign (#) dialed on a telephone keypad or rotary dial to enable or disable certain telephone service features. Some vertical service codes require dialing of a telephone number after the code sequence. On a touch tone telephone, the codes are usually initiated with the star key, resulting in the commonly used name star codes. On rotary dial telephones, the star is replaced by dialing 11.
In North American telephony, VSCs were developed by AT&T Corp. as Custom Local Area Signaling Services (CLASS or LASS) codes in the 1960s and 70s. Their use became ubiquitous throughout the 1990s and eventually became a recognized standard. As CLASS was an AT&T trademark, the term vertical service code was adopted by the North American Numbering Plan Administration. The use of vertical is a somewhat dated reference to older switching methods and the fact that these services can only be accessed by a local telephone subscriber, going up (vertically) inside the local central office instead of out (horizontally) to another telephone company.
How do we notify building control?
I tried on Gas Safe notifications but there is nowhere on the notifications menu for just a direct unvented cylinder (not gas).
I've been given a job by a builder working on an insurance claim and I have to re-install an oil tank and re-connect the tank & boiler, which I can do without too much of a problem but, haven't done before.
My main concern is the local BC; do I have to notify them regarding this? If so when?
The...
Hi every one,
just seeking your experience and knowledge again all comments appreciated in advance.
As title saids i obtained a bpec unvented hot water card whilst doing my apprenticeship, it is still in date and carried out maintenance work whilst employed by the company who put me through...
Had a customer ring this morning who is looking to move and needs their Gas Notification certificate but doesn't have it :( Checked my GSR account and it looks like i forgot to do it at the time.......... which was April '08.... Oops !!
Just been onto GSR site and tried to notify it...
Hi,
I have been trying to notify some appliances with GSR online & have run into dificulty :(
Admittedly I have saved them up for a while so thought i had better notify them now. What happens is :- The process all goes well & the notifications are all done sitting there waiting for payment...
The title says it all.
I'm moving an unvented cylinder from a house, to a anex that has been built for the property.
At some point I will be installing a new heating system with a new cylinder back in the main house. Which I will notify to building control via Gas Safe.
Do you guys think I...
bathroom
boiler
building
building control
central heating system
control
cylinder
gas
gas boiler
gas engineer
gas safe
gas safe register
gsr
install
job
jobs
moving
notify
safe
should
system
unvented
unvented cylinder
waste
work
Okay, so I've had my new boiler installed and commissioned. Do I now need to notify the LABC to get a Building Regulations Compliance Certificate? If so, how do I go about this?
Monkfish
Thread
boiler
building
building regs
building regulations
gas
gas safe
installers
new boiler
notify
oil
paperwork
plumbers
register
regulations
response
safe
system
tee
work
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.