Hello - I'm a relatively new owner of an old house here in France that was updated by the previous owner who lives in the UK. He used one channel of a two channel Horstmann C27 to control turning on and off the electric water heater. Given that I'm from the states, I'm not all that familiar with...
Hi all. I'm having issues with the Flomasta bottom-entry fill valve in a toilet; the 'float' comes up but doesn't have any effect, it simply won't stop filling, leading to water constantly flowing down the overflow. The cistern is in a sealed unit so without ripping the whole thing apart is only...
Reggie
Thread
america
bottom
entry
fill valve
filling
flomasta
overflow
usa
valve
won't
Flomasta fill valve bottom entry with brass shank, v 1.1
Looks great but the instructions say the cistern thickness at the bottom mounting point must be min 8.5mm. Just a diagram - doesn't say why.
My cistern is a concealed one made of polythene or something like it, and is only 5mm thick...
Hi all. I hope you’re well!
I’m having issues with my Flomasta toilet in my main bathroom. This was only installed a couple of years ago after moving in where limescale wreaked havoc with the previous system.
as you can see from the video, it’s filling from the top (the video shows this much...
Hello! I had to replace the flush mechanism of my loo. I installed the new mechanism mentioned above. All seemed well but the cistern slowly leaks into the pan! What did I do wrong? Thanks!
Can anybody advise what size fittings are needed to connect this to the flush pipe?
https://www.diy.com/departments/flomasta-dual-flush-fill-valve-kit/3663602452232_BQ.prd
Hi everyone,
I'm a complete novice here.
My partner recently passed away, and as part of her estate, our house was renovated. Unfortunately, I didn't get a say on the choice of builders and several corners were cut. That aside, my daughter and I have been given back the keys and started...
Can anyone help with how to adjust float on a Flomasta Bottom Inlet Brass Shank Fill Valve as there is no screw. its from screwfix. its been overflowing. many thanks.
Hi I have fitted a flomasta shower pump to a mixer shower gravity, it did work wen I set t up but now has stopped.
I took he pump out and reconnected the pipes with some plastic pipe and had nothing coming through. Disconnected the valve and had water through. Took the elbows off the valve and...
ozzy
Thread
check
flomasta
pump
shower
shower pump
through
valve
water
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.