Search the forum,

Discuss flomasta shower pump in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
O

ozzy

Hi I have fitted a flomasta shower pump to a mixer shower gravity, it did work wen I set t up but now has stopped.
I took he pump out and reconnected the pipes with some plastic pipe and had nothing coming through. Disconnected the valve and had water through. Took the elbows off the valve and blew through the check valve in the cold opened but the hot didn't I freed it and put it back together. water flowed ok so refitted the pump all ok until later that evening it wouldn't work again. If the fault is the check valve stopping the pump from kicking in on the hot would that shop the cold as well ?

Any thoughts would be helpful

Ozzy
 
Status
Not open for further replies.

Reply to flomasta shower pump in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Creating content since 2001. Untold Media.

OFFICIAL SPONSORS

OFFICIAL SPONSORS

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock