changed

  1. B

    Changed Disc still leaking?!

    Hi, I'm new to the forum. I had a new bathroom and hot water pump(Stuart Turner) fitted a few years ago. A few weeks ago my hot water pump started to turn on every so often I knew there was something up with the hot water. I noticed that as the pump build the pressure the bathroom bath tap would...
  2. R

    Bubbling hot water pipes - have changed thermostat

    Hi all, i have a potterton suprema 40l boiler with potterton timer control and Drayton hot water thermostat. a couple of weeks ago, I noticed the hot water cylinder and surrounding pipes which are in my bedroom were making a really loud bubbling / gushing noise. Initially I thought it was the...
    • Rotondo
    • Thread
    • boiler bubbling changed hot hot water pipes problem replaced thermostat water water pipes
    • Replies: 15
    • Forum: Plumbing Jobs | The Job-board
  3. Keefy

    My life just changed

    The missus just told me she's pregnant. She came in before and told me she'd been to see a doctor and had this look on her face I couldn't figure out, I really thought she was about to give me bad news of the worst kind then she told me she's pregnant. I just went from having the worst...
  4. F

    It's like I'v changed my phone number....

    I had a very good run of work up until easter, now nothing.... I can understand that when the kids are off school people don't want plumbers / gas fitters in their homes, banging & crashing around, but how on gods earth can it go this dead so quick?.?.?.? I'm into my 3rd year of trading now...
  5. A

    Halstead Ace 30 HE combi hot water not getting hot enough? changed diverter?

    Hi, so got called out to a halstead ace 30 he combi, with fault code f1 - over heat fault. Only happened when the heating was on and then hot water called off. So the boiler was sensing the flow and lighting but the heat was staying in the boiler and over heating. So changed the diverter 140...
    • alastair
    • Thread
    • ace changed combi diverter enough getting halstead hot hot water not getting hot water
    • Replies: 10
    • Forum: Plumbing Jobs | The Job-board
  6. C

    What's changed in the ccn1

    What's changed in the gas qualifications as my certificates are up in August and I'm wondering. What has changed
  7. A

    drayton lp722/ BGas up2 timer problem

    Hi I've had 2 British Gas UP2 and two Drayton LP722 timers in the past month all exhibiting the same fault; CH set to boost for one hour after the last off-time of the evening will often (not always) result in the CH being on all night. In the morning the letters BST are still visible on the...
  8. M

    Baxi Solo 3PFL 80 rapid cycling

    I have an annoying fault which has crept in recently. My boiler started to trip out on overheat, despite the boiler thermostat being set at 50% full scale. BG have visited 5 times and have 1. Replaced motor on the pump as it had overheated. See second visit.... 2. Opened the pump spill back...
  9. M

    Powermax 155 Hot Water Problems

    I know the Powermax Boilers are not the best in the world and Plumbers like to keep arms length. If anyone could give me any guidance I would be more than happy. I was asked by a family member to look at their Powermax 155 Boiler as they had hot water for the first 30 seconds then cold. Having...
    • mickeyspark
    • Thread
    • changed first hot hot water powermax problems though thought water
    • Replies: 6
    • Forum: Plumbing Jobs | The Job-board
  10. M

    Flue terminal positions close to windows - changed?

    Hi We all know terminal must be 300mm from an opening window - but am I dreaming or has the rule changed now for distance from non opening windows? Seem to remember seeing somewhere that it now based on distance from a change in structure eg from edge of where brick changes to window frame...
  11. C

    Vokera compact 28

    I have a problem with a Vokera compact 28. After tests and talking to vokera I changed the PCB and the boiler worked straight away. Customer has phoned and said the boiler has stopped again. Fan runs, pressure switch activates and boiler lights and goes off again to red light on display. I...
    • Curnsie28
    • Thread
    • again board boiler changed compact ignition vokera vokera compact
    • Replies: 3
    • Forum: Plumbing Jobs | The Job-board
  12. G

    Little help please?

    Got a call customer has no hot water. So turn up they tell me the potterton prima f60 had been making a noise and over heating. They had been resetting the over heat. But it only happens on hot water. So I pop upstairs to find a sticking Drayton 3 port. I swap that to a Honeywell and all is...
  13. C

    Drayton digistat

    Hi,I have a problem with our digistat ,there apears to be no signal being picked up by the SCR unit,the red light on permanently,have changed the batteries in the stat and the temperature is visible also the flame symbol.Do I need to recommission the digistat R.F system or is there someting else...
  14. W

    Let by test, temperature stabilisation etc has changed, like when?

    Okay folks, heres my first post, im on my hands and knees going through what im doing, inspectors looking over my shoulder asking for a step by step of my test, doing my let by, go onto my temperature stabilistaion, then I here him say words to the affect that the test has changed, have searched...
  15. S

    Tap washers changed but leaking

    Afternoon all, Kitchen sink mixer tap. Took heads off, removed tap inards, changed washers. The brass inards now leak when the taps are opened. I have taken these apart there dont seem to be any washers or o rings but do come apart by turning (just a male thread into a female fitting where the...
  16. M

    Long life oil hoses

    How often should these be changed? On worcesters they say the hoses should be changed every year is this even with long life hoses?
  17. A

    Has GasSafe changed in the past 2 years?

    Hi im looking to re-register shortly and was wondering what has changed in the past 2 years has information on there website improved etc etc? also are there any new things with which i will need to be brought up to speed on? Cheers
  18. F

    New EcoTEC pro 24 wiring changed.

    Hi, I wonder if anyone can help. I have recently installed the new version of the Vaillant EcoTEC pro 24. I am trying to wire in a honeywell CMT927 room stat but Vaillant appear to have changed the connections. Whether is was a senior moment, i cannot for the life of me get it to work. Any...
  19. L

    gate valve

    hi all went to a customers house today to change leaking kitchen taps.... the chap informed me to stop the tap running he had isolated the gate valve on the down service to h/w cylinder. problem is when the new taps was installed the gate valve wouldn't open more than 1 - 2 turns. i tested...
  20. T

    Bearing plate

    Changed a gas valve on a Worcester 30cdi today and did my first Fan Bearing Plate change, needed to be changed as their was a small split in the rubber flap. and also adjusted air/gas ratio. Its a great feeling to repair something thats broken down and get it running again. Very Happy Customer...

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock