Discuss Best place for end feed or capillary fittings in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Nick Cox

Gas Engineer
Messages
29
I am looking for a good place to buy in bulk end feed and capillary fittings, I have looked at BES but don't think they are very cheap can anyone recommend anywhere please.
 
Do you need to buy in bulk ? just means you have loads of stock sitting around, unless you have a high volume of work its not always worth the outlay.
 
Do you need to buy in bulk ? just means you have loads of stock sitting around, unless you have a high volume of work its not always worth the outlay.

Agree , I used to by too much in bulk , but have stopped now , however generally buy of JTM plumbing , good value and superb delivery
 
I just thought it would work out cheaper to buy in bulk and I would not have to keep going to merchants for just 1 item
its awkward when there is no local merchant where your working
 
I just thought it would work out cheaper to buy in bulk and I would not have to keep going to merchants for just 1 item
its awkward when there is no local merchant where your working
I use the Stanley storage box's and find they hold enough for every day use (common fittings 15 & 22) if you get the deep case its surprising how meny they hold, larger jobs just buy extra as needed, and you don't save that much buying in bulk, + you tend to loose quite a lot rolling around in the van
 
Try Williams, not always the cheapest though!
Ive been doing some book work today and I have found Williams not cheap at all. Local builders merchants that we use for example are 25% cheaper in the same month for everyday material such as pipe and fittings I was surprised today when I looked and found that screwfix are £20 cheaper for a pack copper
 
Ive been doing some book work today and I have found Williams not cheap at all. Local builders merchants that we use for example are 25% cheaper in the same month for everyday material such as pipe and fittings I was surprised today when I looked and found that screwfix are £20 cheaper for a pack copper

Yep always said they weren't but service is ok
 
Ive been doing some book work today and I have found Williams not cheap at all. Local builders merchants that we use for example are 25% cheaper in the same month for everyday material such as pipe and fittings I was surprised today when I looked and found that screwfix are £20 cheaper for a pack copper
Isn’t there copper thin though?
 
Status
Not open for further replies.

Reply to Best place for end feed or capillary fittings in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top