Search the forum,

Worcester Junior 28i Faulty PCB Board

Post new thread

Discuss Worcester Junior 28i Faulty PCB Board in the Central Heating Forum area at PlumbersForums.net

W

Wilbert

Messages
1
I need some help with a Worcester Junior 28i gas boiler and I'm hoping someone here may have came across this fault before ...

I have checked the following:

  • 240v at supply connections
  • All internal push on connections are correctly fitted to the PCB board
  • The transformer is giving the correct outputs
  • All internal fuses on the PCB board are tested and showing OK
  • I put a temporary link across LS and LR but when the 240v is switched onto the boiler no lights show on the front of the boiler (reset light, blue light or the maintenance light). The boiler doesn't even attempt to fire.

I have already replaced the PCB board and the fan PCB board but this didn't fix the issue.

What further checks would you recommend to get the boiler to fire? Any advice would be appreciated!
 
Have you checked L-N ? 240 ?
 

Reply to Worcester Junior 28i Faulty PCB Board in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

F
  • Question
No Hot water, Fixed and Broken Again Ideal Logic 24
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
113
Lou
Lou
johndave
Outdoor stopcock doesn't fully close
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
238
exedon2
exedon2
M
Viessmann external flue run conundrum
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
171
mutley racers
M
P
Repeated Airlock in Bathroom
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
316
Chuck
C
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock