Discuss What do I need to cap these pipes? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
1/2 brass cap and washer
Blank Nut ½ x
And a 1/2 tap washer
Arctic Products Pegler Tap Washers ½
Don't forget to turn the water off first
Turn the screwed one to quarter to three . In otherwords horizontal . The other pic needs a 15mm cap but with a fibre washer in .
And make sure the insert is inside the pipe for the tapPersonally I would isolate the water and use a 15mm insert and pushfit cap after the isolation valve on the toilet and remove the coupler from the bottom union on the tap connection and use a 15mm compression cap
And make sure the insert is inside the pipe for the tap
Forgot that.Don't use a super seal jg insert on compression tho
Surely just a 15mm compression stop end?Turn the screwed one to quarter to three . In otherwords horizontal . The other pic needs a 15mm cap but with a fibre washer in .
Surely just a 15mm compression stop end?
Reply to What do I need to cap these pipes? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.