Discuss SD IDEAL STANDARD Toilet Seat in the USA Plumbers Advice area at PlumbersForums.net

Messages
6
Dear Team

i have IDEAL STANDARD WC D shape toilet, unfortunately the seat cover is very loose, can't find any below screws to fix or tighten. Can any one help to fix this.
as with lockdown school's being closed and everyone at home we're really struggling as the seat is very wobbly. The toilet is fully attached with wall but can't find any below or back the toilet for excess screws. I would appreciate if I can get any advice or help in regards to that.



Regards

MM
 

Attachments

  • IMG_3702.jpeg
    IMG_3702.jpeg
    309.3 KB · Views: 24
  • IMG_3701.jpeg
    IMG_3701.jpeg
    355.6 KB · Views: 22
  • f8cbfdca-854a-4394-842e-f58762d6417f.jpg
    f8cbfdca-854a-4394-842e-f58762d6417f.jpg
    79.6 KB · Views: 26
  • b531eb45-bd73-4117-bbcd-4a18bb180bd0.jpg
    b531eb45-bd73-4117-bbcd-4a18bb180bd0.jpg
    67.5 KB · Views: 21
  • b85d58e1-7e7e-47f4-81d9-1b04a5c7245b.jpg
    b85d58e1-7e7e-47f4-81d9-1b04a5c7245b.jpg
    66 KB · Views: 17
Tighten the cross headed screws

as for the leak needs further investigation
 
Try lifting so there’s no wiggle / isn’t loose and tightening the screws

the leak in the ceiling pics ?
 
Seats fixings with a screw are inserted from above, there are vaious types from plastic wedges to rubber bungs.
If the screw won't tighten, its probably corroded into the fixing.

As Shaun, sometimes pulling the seat up to put pressure on the fixing and tightening the screw works.
If not then it's a case of hacksaw through the screw, let the lower part fall behind the pan and use a new fixing.

The one below is from toolstaion, lots of others are available if you seacrh, but check the length of screw need before buying.

WC seat fix.PNG
 
Seats fixings with a screw are inserted from above, there are vaious types from plastic wedges to rubber bungs.
If the screw won't tighten, its probably corroded into the fixing.

As Shaun, sometimes pulling the seat up to put pressure on the fixing and tightening the screw works.
If not then it's a case of hacksaw through the screw, let the lower part fall behind the pan and use a new fixing.

The one below is from toolstaion, lots of others are available if you seacrh, but check the length of screw need before buying.

View attachment 47680
Great Help

Thanks your much every one. its fixed and peace of mind.
 
Seats fixings with a screw are inserted from above, there are vaious types from plastic wedges to rubber bungs.
If the screw won't tighten, its probably corroded into the fixing.

As Shaun, sometimes pulling the seat up to put pressure on the fixing and tightening the screw works.
If not then it's a case of hacksaw through the screw, let the lower part fall behind the pan and use a new fixing.

The one below is from toolstaion, lots of others are available if you seacrh, but check the length of screw need before buying.

View attachment 47680
great help many thanks
 

Reply to SD IDEAL STANDARD Toilet Seat in the USA Plumbers Advice area at PlumbersForums.net

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock