Search the forum,

Discuss Robust mobile phones in the General Off-Topic Chat area at PlumbersForums.net

king of pipes

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
6,157
After breaking the screen on yet another expensive Google mobile phone ☹️ I've got myself a CAT S31 Tough work phone, it does everything the Google did and seems alot stronger in build only issue is the camera is really poor 8mp which I will have to put up with . Regards Kop
 

Attachments

  • Screenshot_20211002-085241.png
    Screenshot_20211002-085241.png
    285.1 KB · Views: 18
Don't the CAT phones have built in thermal imaging function?
There is a more expensive one that does I have a flir thermal imaging camera So went for a cheaper model to try it's ok for £180 but the camera is pony the wife looks warm 👍 . Kop
 

Attachments

  • ThermalCamera2020-01-19_18-46-08+0000.jpg
    ThermalCamera2020-01-19_18-46-08+0000.jpg
    78.8 KB · Views: 7
Last edited:
I had a CAT 31 for a few years and it was brilliant, upgraded to a CAT s61 with the thermal imaging but have since left the trade so I don't use the TI at all, bit of a waste of money I suppose but the phone is brilliant, dropped it in the sea many times, have used the underwater camera a couple of times.
Proper robust phones!
 

Reply to Robust mobile phones in the General Off-Topic Chat area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
231
Copper pipes, I think its fair to say, is not what it used to be, the copper is getting thin while the cost is going up. Meanwhile, plastic Pushfit seems to be getting better and better, cost and convenience was always better, but now the quality is to, have we reached a stage where plastic will...
Replies
2
Views
238
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
121
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
322
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
263
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock