Search the forum,

Discuss Ram pump in series with water level controller in the DIY Plumbing Forum area at PlumbersForums.net

Messages
2
I have a draft Idea to connect water level control valve in series with ram pump . This setup will be inside inlet of loft tank. The Idea is to pull water from Over head tank in to loft tank quicker. Please review and suggest.

water level control valve :

ram pump:
Design:
Loft tank inlet => water level controller => ramp pump
 
Not a good idea. If you want to increase the flow, increase the diameter of the pipe between the overhead tank and the the destination.
 

Reply to Ram pump in series with water level controller in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
227
Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
238
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
221
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock