J
john2k
I've just had my 6/7 year old Potterton HE Plus repaired by Baxi, they replaced the igniter probe as the old one was corroded and there is apparently a new re-designed part. So I now have this new probe
The igniter probe was cleaned about 7 months ago by another Gas Safe engineer, so if after 7 months it became heavily corroded again, does this indicate there might be something else wrong too? What about the main bit where the gas burns? This main chamber was cleaned out with a wire brush and washed down last time by the previous engineer who said it was quite badly corroded and he predicted that it wont last long.
I got this repair done under a Baxi service plan which covers repairs.
Any advice would be much appreciated.
Thanks.
The igniter probe was cleaned about 7 months ago by another Gas Safe engineer, so if after 7 months it became heavily corroded again, does this indicate there might be something else wrong too? What about the main bit where the gas burns? This main chamber was cleaned out with a wire brush and washed down last time by the previous engineer who said it was quite badly corroded and he predicted that it wont last long.
I got this repair done under a Baxi service plan which covers repairs.
Any advice would be much appreciated.
Thanks.
