Is there a gas engineer full tool bundle I can buy?

[Abgash]

Hi, I'm about to start a gas engineering course and I'm trying to buy all the tools beforehand. Does anyone else know if there's a full tool kit available from anywhere?

 

[Riley]

Would you be comfortable giving us an x-y bracket for pay and we could say if this is likely/achievable in the first couple of years

 

[Riley]

I maintain you would appreciate it more if you did plumbing first. You will make more sense of the gas

 

[ShaunCorbs]

It just seems like a job I'd enjoy doing and I need to get out the job I'm in. If I earn the same salary as I'm on in my current job I'd still be happy. I just want skills and thought this one was best.

what you earning now?

 

[Abgash]

£24k

 

[Riley]

You'll struggle to get that in the first few years

 

[jtsplumbing]

It just seems like a job I'd enjoy doing and I need to get out the job I'm in. If I earn the same salary as I'm on in my current job I'd still be happy. I just want skills and thought this one was best.

Are you a hands on type of person ? have you been involved with heavy & dirty work ? do you have any knowledge of the building industry ? Please don't spend lot of money doing this course if your impression of this type of work is watching someone repair your boiler and you think that this is an easy way to make a living! believe me its not ! it takes years of experience not months, people are under the impression that this job is easy money, but remember get it wrong and people can die ! 24K to start please get your head out of the clouds, You say you have a van and from what you are saying , you intend to start doing some gas work at the same time as you are doing your training ! do you understand that you will be braking the law if you do this ? Asking about tools ! you cant do this job with a screwdriver and a couple of spanners, wait until you have started the course then you will have a better idea of what is required, think in the area of 5K for tools when starting out.

 

[Abgash]

I'm not doing work while training I'm trying to build up tools for the end of my training while I have cash. Yes I am used to hard, dirty AND heavy work that's all I've done I never once said it was easy. If I thought it was a few spanners and screwdrivers I wouldn't be asking about tools!

 

[jtsplumbing]

Just wait until you start, ask the person doing the training what he uses, don't be tempted to buy cheep tools, if you intend to do boiler work then you will need a good analyser , a multi meter just for starters that takes care of 1K , but you find it a struggle doing this job without having knowledge of plumbing systems and controls, most guys on here started has plumbers then over the years progressed in it doing gas work, when I started doing gas was part of the plumbers job, but over the years gas has become more specialized that is why you cant learn to do this job in a few months, will you be earning anything whilst training is it a hands on course or a home study one ??

 

[jtsplumbing]

What are you hoping to do after you have done the course ?

 

[leelister6]

Full set of screwdrivers
3-4 different sizes of adjustable spanners
spanners
pipeslices
stilsons
pliers
water pump pliers
pliers
mole grips
hacksaw (junior & biggun)
allen keys (metric & imperial)
olive splitter
mastic gun
files
immersion spanners
hammers
wood chisels
cold chisels
basin wrenchs
box spanners
stanley knife
adjustable pipe cutters
selection of wood saws
spade bits
holesaw set
socket sets
core drill set
cordless drill driver
impact wrench
jigsaw
circular saw
sds hammer drill
multitool
pipe bender
bending springs
angle grinder
tape measures
bleed keys
rad tail wrench
blowtorch
heat mat
crowbars
ladders
steps
hop-ups
hose pipes
buckets
dust sheets
carpet protector
towels
gloves
dustmasks
goggles
workwear
tool boxes
storage boxes
vacuum cleaner (wet & dry)
extension leads
van vault
FGA
multimeter

copper fittings and pipe
waste fittings and pipe
solder
flux
screws
silicone
washer kits
o ring kits

public liability insurance (at least £2 million)
tool insurance
van insurance

That should get you started

 

[AlexGas]

Full set of screwdrivers
3-4 different sizes of adjustable spanners
spanners
pipeslices
stilsons
pliers
water pump pliers
pliers
mole grips
hacksaw (junior & biggun)
allen keys (metric & imperial)
olive splitter
mastic gun
files
immersion spanners
hammers
wood chisels
cold chisels
basin wrenchs
box spanners
stanley knife
adjustable pipe cutters
selection of wood saws
spade bits
holesaw set
socket sets
core drill set
cordless drill driver
impact wrench
jigsaw
circular saw
sds hammer drill
multitool
pipe bender
bending springs
angle grinder
tape measures
bleed keys
rad tail wrench
blowtorch
heat mat
crowbars
ladders
steps
hop-ups
hose pipes
buckets
dust sheets
carpet protector
towels
gloves
dustmasks
goggles
workwear
tool boxes
storage boxes
vacuum cleaner (wet & dry)
extension leads
van vault
FGA
multimeter

copper fittings and pipe
waste fittings and pipe
solder
flux
screws
silicone
washer kits
o ring kits

public liability insurance (at least £2 million)
tool insurance
van insurance

That should get you started

Pencils :builder:

 

[rpm]

Knee pads

 

[leelister6]

Pencils :builder:

assorted levels
sharpie markers
electrical tape
ptfe
rawlplugs
assorted pipe clips
notebooks
drywall saw
spare blades for knives, saws etc
cup
spoon
paper towel roll
kneepads
radio (DAB)
spare batteries
wet wipes

 

[Riley]

Knee pads

God yes

 

[Stoney Ground]

Full set of screwdrivers
3-4 different sizes of adjustable spanners
spanners
pipeslices
stilsons
pliers
water pump pliers
pliers
mole grips
hacksaw (junior & biggun)
allen keys (metric & imperial)
olive splitter
mastic gun
files
immersion spanners
hammers
wood chisels
cold chisels
basin wrenchs
box spanners
stanley knife
adjustable pipe cutters
selection of wood saws
spade bits
holesaw set
socket sets
core drill set
cordless drill driver
impact wrench
jigsaw
circular saw
sds hammer drill
multitool
pipe bender
bending springs
angle grinder
tape measures
bleed keys
rad tail wrench
blowtorch
heat mat
crowbars
ladders
steps
hop-ups
hose pipes
buckets
dust sheets
carpet protector
towels
gloves
dustmasks
goggles
workwear
tool boxes
storage boxes
vacuum cleaner (wet & dry)
extension leads
van vault
FGA
multimeter

copper fittings and pipe
waste fittings and pipe
solder
flux
screws
silicone
washer kits
o ring kits

public liability insurance (at least £2 million)
tool insurance
van insurance

That should get you started

I find if you can use the :hammer: properly, you don't need the rest.

 

[Abgash]

I understand what your saying regarding the plumbing side of things but I'm just not in a position for training beforehand. I am lucky enough to have a weekend job though in place to support me while I learn.

 

[Abgash]

???

 

[Abgash]

I find if you can use the :hammer: properly, you don't need the rest.

????

 

[leelister6]

????

Hammer

 

[jtsplumbing]

I understand what your saying regarding the plumbing side of things but I'm just not in a position for training beforehand. I am lucky enough to have a weekend job though in place to support me while I learn.

Without any knowledge of how systems work you are going to struggle doing this job ! what do you intend doing when you have finished this course ? and doing this course still wont let you work on gas, you will still need to do the ACS courses then get accepted on the Gas Safe register.

 

[leelister6]

On a brighter note, there may be an awesome toolkit on Ebay in 12 months!

 

[SteveWannadoGas]

I would have the qualifications for domestic work but I think my stumbling g block would be experience , the least amount of experience I've came across for a job is a year. That's why I want tools for at least a bit of back up to try and get some work till I get full time somewhere.

Hi Abgash, this is where some people come a cropper. They cant get the practical hands-on experience, so they cannot build a portfolio of evidence and so cannot get registered. Documented hands on experience is necessary to get yourself registered and most people struggle to get that.

 

[jtsplumbing]

Hi Abgash, this is where some people come a cropper. They cant get the practical hands

This is what he cant seem to grasp , he seems to be under the impression that by doing this course he will be able to work on gas ! someone seems to be misleading him into doing this course, he has no experience in the plumbing trade, not sure what he is doing for a job at the moment ? But is convinced he will be qualified to work on domestic gas after this 7mth course ! someone needs to have a serious talk with him B4 he throws his money down the pan.

 

[leelister6]

Unfortunately the forum is awash with such people, come on here asking for advice then don't hear what they expect or want to hear. Fair enough, he's only asking about tools but has been given some serious food for thought regarding qualified versus experienced. I was lucky enough to go down the apprenticeship route including 7 years of college and learned more from the blokes I was working with than the plums trying to teach me at college. Anyway, advice given and best of luck to the O.P.

 

[Abgash]

Hi Abgash, this is where some people come a cropper. They cant get the practical hands-on experience, so they cannot build a portfolio of evidence and so cannot get registered. Documented hands on experience is necessary to get yourself registered and most people struggle to get that.

Part of the course is going g out with a gas engineer to build up a portfolio.

 

[AlexGas]

Part of the course is going g out with a gas engineer to build up a portfolio.

Enjoy and all the best to you.

 

[Abgash]

Without any knowledge of how systems work you are going to struggle doing this job ! what do you intend doing when you have finished this course ? and doing this course still wont let you work on gas, you will still need to do the ACS courses then get accepted on the Gas Safe register.

At the end of the course I will sit an ACS assessment.

 

[Abgash]

Without any knowledge of how systems work you are going to struggle doing this job ! what do you intend doing when you have finished this course ? and doing this course still wont let you work on gas, you will still need to do the ACS courses then get accepted on the Gas Safe register.

ACS assessment comes at the end of the course. I'm hoping to do boiler and cooker work.

 

[Abgash]

Unfortunately the forum is awash with such people, come on here asking for advice then don't hear what they expect or want to hear. Fair enough, he's only asking about tools but has been given some serious food for thought regarding qualified versus experienced. I was lucky enough to go down the apprenticeship route including 7 years of college and learned more from the blokes I was working with than the plums trying to teach me at college. Anyway, advice given and best of luck to the O.P.

I never asked advice, as you said I asked about tools.

 

[AlexGas]

I never asked advice, as you said I asked about tools.

Do you need an advice on which tool to buy?