Search the forum,

Discuss Internal gas line - low carbon steel in the Gas Engineers Forum area at PlumbersForums.net

Messages
14
Hi guys,

I’m looking for some advice, I’ve searched all of google and can’t find anything on this topic.

I’m currently getting all the rads changed in my home, while getting this done the plumber/gas engineer has advised I change my gas line.

My house was built in the 1930’s, the current line consists of low carbon steel which goes directly from the gas meter under the floor boards and to 3 appliances - gas hob and 2 fireplaces.

The reason the gas engineer has advised of the change is because apparently low carbon steel corrodes internally and causes a lack of flow so better to change to copper now while the house is getting renovated.

He has proposed to run a 22mm line through the house and branch off to 15mm for the appliances.

What I want to know is, is it best to get this low carbon line changed to a more up to date copper line? Or Are low carbon lines fine and the engineer just trying to make some money out of me?

all help will be appreciated.

thank you!
 
A 1930s gas set up ! It’s a no brainer take out all of it make sure your GSR fitter gives you a certificate of completion etc. This will be well worth it...peace of mind..happy sleeps and this will help when you get to sell your gaff on . Centralheatking
 
Thank you CHking, yes on greater thought I thought for the sake of a few pounds it’ll help with the hassle in future as then I’ll have to pull up all carpets and floorboards etc
 

Reply to Internal gas line - low carbon steel in the Gas Engineers Forum area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
402
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
225
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock