ideal icos he 24

[jonnyboy]

hi lads any ideas what F-L fault code is boiler runs good no probs on heating for 2-3hrs then code appears

 

[lame plumber]

get on the private forum for an answer

 

[Dotty]

Moved

 

[lame plumber]

http://idealboilers.com/installer/wp-content/uploads/sites/2/2013/08/203318_inst.pdf

flame error, check flame detector probe and then think about a new orange pcb is the norm

 

[arran197]

Check the condense pipe and trap. Ask the customer if it's noisy too as this is usually another symptom of a blocked condense.
If that's clear, check the electrodes inside the burner chamber as they bend too.

 

[jonnyboy]

cheers lads knew L-F code was flame problem but customer insist,s it is F-L suspected one of these magic codes only the s.a.s. get to know we will see Monday morn thanks again john.

 

[arran197]

It's only a single digit display, so easy to get confused, but the manual lists them, so you can see which is which anyway.

 

[zeebeedee]

Its l-f there reading it wrong

 

[jtsplumbing]

Replace electrodes & Leads.

 

[townfanjon]

Check the condense pipe and trap. Ask the customer if it's noisy too as this is usually another symptom of a blocked condense.
If that's clear, check the electrodes inside the burner chamber as they bend too.

check the above I had one recently, the error code didn't relate to the fault listed in the book.