Halstead ace thermistor

[Mpb-10]

Hi guy,

I'm new to fault finding side, I've known so many people I know misdiagnose and it's cost them for part, kind sort of put me of repairs, but to be honest I want to be able to do it, so decided to give it a go, went on the baxi courses, and a few others for training.

my question after boring you with that is, I've a halstead ace combi I've just been to see, no heating, if I disconnect the heating thermistor I'm getting a reading of 13k ohms, didn't have my analyser to check temperature of pipe, but if I do a continuity test on the thermistor across the 2 pins, I get no continuity beep, from multi meter, is the thermistor knackered, a plumber I know, but don't trust must, told me if there's a reading there fine.

Hope you can help

 

[gasmanrob]

You'll need to prove you are gas safe registered to one of the mods and they can add you to the gas safe forum inside you will find a looooong list of component resistances on pretty much any boiler made up to 2012

 

[PlumbBobBob]

send a pm to gas man or redsaw with your details and after a test to prove you are qualified you will be admitted to the gas safe private forum where you can ask away to your hearts content.