continuity

In fiction, continuity is a consistency of the characteristics of people, plot, objects, and places seen by the reader or viewer over some period of time. It is relevant to several media.
Continuity is particularly a concern in the production of film and television due to the difficulty of rectifying an error in continuity after shooting has wrapped up. It also applies to other art forms, including novels, comics, and video games, though usually on a smaller scale. It also applies to fiction used by persons, corporations, and governments in the public eye.
Most productions have a script supervisor on hand whose job is to pay attention to and attempt to maintain continuity across the chaotic and typically non-linear production shoot. This takes the form of a large amount of paperwork, photographs, and attention to and memory of large quantities of detail, some of which is sometimes assembled into the story bible for the production. It usually regards factors both within the scene and often even technical details, including meticulous records of camera positioning and equipment settings. The use of a Polaroid camera was standard but has since been replaced by digital cameras. All of this is done so that, ideally, all related shots can match, despite perhaps parts being shot thousands of miles and several months apart. It is an inconspicuous job because if done perfectly, no one will ever notice.
In comic books, continuity has also come to mean a set of contiguous events, sometimes said to be "set in the same universe."

View More On Wikipedia.org
  1. P

    When to use continuity bonding

    Hi, I know when applying flame to a fitting you remove the gas meter and fit bonding upstream and downstream, and if cutting into a gas pipe you use bonding either side of break. Do you use it if replacing and isolation valve?
  2. W

    Flexible hoses and electrical continuity

    My understanding is these don't provide elec continuity. But which part of them breaks the continuity? And do all of them fail to provide it or will some do so? Thanks
  3. M

    safe electrical isolation check before servicing a boiler

    Hi all, After completing my plumbing NVQ I am now completing my gas portfolio after just spending a week placement with British Gas. Part of the boiler service is to complete a Dynamic Assessment Checklist and so first perform a safe electrical isolation check. Now this involves 2 tasks: 1st...
  4. Inverness

    continuity earth rod for gas pipe suitable

    i serviced and did a landlord safety certificate today and it did not have any earth continuity was not visible i know it has to be a minimum of 600mm. the customer wants us to get it earthed. we will get a sparky to take a earth connection from gas pipe to the consumer unit. the problem is...
  5. M

    Halstead ace thermistor

    Hi guy, I'm new to fault finding side, I've known so many people I know misdiagnose and it's cost them for part, kind sort of put me of repairs, but to be honest I want to be able to do it, so decided to give it a go, went on the baxi courses, and a few others for training. my question after...
  6. W

    Cheap almost free continuity tester Aldi, Morrisons, Tesco!

    Or use a spade. https://www.youtube.com/watch?v=3pZMy-c8VQA
  7. P

    Flame recification continuity check

    Hi Guys i went to a Alpha CB 24 today and it was constantly sparkin so i did a continuity check on the electrode and lead and all seemed fine, do's that mean that it is the board that is at fault? Any help would be apprieciated, Thanks Guys
  8. J

    What to test with a multimeter?

    Can anyone give me guidance what I can test on a combi with a multimeter and what to look for. Many thanks in advance.
  9. N

    Glow Worm Compact 60 FF System Boiler

    Hi, I'm new to boiler repairs and breakdowns etc, always stuck to fitting gas work and left repairs to others. A chap I know has asked me to look at his Glow Worm Compact 60 FF System Boiler, it has no power to it at all, been through the fault finding in the book which points towards the fuse...
  10. A

    earth continuity bonding

    Is the earth bonding on the meter transcos responsibility or is it considered beyond the meter and not their concern
  11. G

    Testing for continuity on boilers

    Hi can anyone explain to me in simple terms about testing this on multimeter with out blowing myself up Is red prob to live or Is it black prob I'm learning and can't get my head around this yet Does anyone have any tips and what to look for on multimeter if components are broken ???
  12. G

    continuity or not

    I had an issue with a alpha CB 24 today and could only get the boiler working intermittently. My question is should you get continuity on the electrode lead from either end ?
  13. D

    spark electrode leads

    hows does one check on a worcester junior 28i what is the resistance on these ?
  14. D

    what readng should overheat thermosat on ferroli sigma 60 read ?

    Hi does anyone know what reading i should be getting from an overheat thermostat on a ferroli sigma 60, thanks.
  15. M

    Vokera 24 compact se

    Have a customer with a 24 compact se that was completely dead. It had power going to it and the internal fuse was ok. There was no illumination of any LED lights and nothing was operating at all on the boiler. Now with the PCB fitted it goes thought the normal sequence of flashing green light...
  16. J

    Electric Testers

    Getting kitted up for level three at college and unsure whether to go down decent multimeter route, usual ones look a bit flimsy so thinking of going a bit more and getting a fluke T140 electric and continuity tester. Will this be enough for working on boilers etc or best sticking with...
  17. S

    No start vokera mynute 20e

    Hi Lads 20e will not start. Fitted new PCB, Call and Power to PCB ok,Continuity on overheat stat, The pump does not run no voltage at it, Could it be the Mode selector switch?
  18. P

    Resistance electrical saftey check test

    Hi, guys im an installer trying to get into fault finding, im trying to understand the resistance check which is used as part of the electrical test before carrying out fault finding on a boiler. I have a dvd which dos,nt give much detail. I would like to now how its done, and is this test...
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock