Discuss Glow worm betacom 30c boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
169
hey guys

Recently purchased a house and while not living in it at the min i set the hw and ch to come on for a couple of hours a day to keep ticking over. Now noticed the radiators wasnt warm when i went in the house. Checked the boiler and it seems the low pressure light is flashing. What can cause this?

Thanks
 
Low water pressure. You need to find the filler loop, which looks like a braided silver hose with a tap at each end, open both valves slowly, and too your water pressure up to about 1 bar.
 
It's been fine for about 3 weeks of owning the house. What can cause this? Would the loop be under the boiler? I can remember seeing some thing similar ? Thanks
 
Thanks for the reply. What causes the pressure to get to low? Would the pipe be under the boiler as I think I'm seen something along those lines
 
What would cause this to happen? Will the hose be under the boiler? I remember seeing some thing along those lines when looking.
 
Status
Not open for further replies.

Reply to Glow worm betacom 30c boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator...
Replies
2
Views
143
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
286
PSxxxxxx
P
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock