Search the forum,

Discuss Dew point on condensing boilers in the USA area at PlumbersForums.net

Messages
43
Can anyone tell me the dew points in kerosene and natural gas condensing boilers please.cant find answer online
 
How accurately do you need the answer? From memory, for natural gas with 10% excess air (for maximum efficiency) the dew point is about 58°C, for oil it's about 49°C.

Don't forget that if you need a boiler to condense a useful fraction of the water vapour in the flue gas you need the return temperature to be significantly (say 5°C or more) lower than the theoretical dew-point.
 
1639523541108.png
 
The big easily got gain with a HE boiler vs a SE boiler is the extra sensible heat extracted from the flue gases due to another Hx installed (called a economiser on steam boilers) which reduces the flue gases by ~ 150C leading to a 7% to 10% gain in efficiency, any condensing effect is a added bonus, fairly easily attained with outside temperature compensation.
 

Reply to Dew point on condensing boilers in the USA area at PlumbersForums.net

Similar plumbing topics

  • Sticky
Morning to any Australians lurking around! Register its free, then message me, I'll sort your account out for you. We will need a moderator from each main country too. I'll post this in the Australian forum now.
Replies
0
Views
79
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
234
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock