Boss Therm BPS242RF ?

[mak]

Hi guys need a bit of help .Cust wants a wireless programmable stat and reciever in but not to clued up which wires go from receiver to boiler .Boiler is Worcester Bosch junior 28i
and the stat is a Boss Therm BPS242RF
On the receiver theres L1 LX L2
Any help would be appreciated

 

[tamz]

Hardly rocket science but

Ls&Ns to L&N

Link L to LX
Lr to L1

It is a rebranded Siemens RDJ10RF and is more trouble than it is worth. It will flash up low battery in a couple of months. The batteries are fine. Slide them out and back in and it will work for another week or 2. Then some times it will loose contact with the receiver and have to be reset which is more hastle.
Bin it and get a Honeywell.

 

[mak]

thanks for the reply .one more question tho ,do you take live and neutral from fuse spur then put them in L + N in the receiver then put wires from L&N on receiver to LS & NS on boiler.

 

[tamz]

No. Take it from the boiler then the next guy to come along might not get plated.

The stat IS junk btw.

 

[tackleburger]

Horrible to actually wire as well backplate is rubbish. If you want a cheapo get a salus.

 

[mak]

sorted now so thanks guys.probs have a call back to it in the near future : (thats the trouble when customers buy the gear .know what you mean about the backplate, total toss