Boiler Toolkit

[Stanios]

Hi fellas, as a beginner on service/ breakdown side of things I am wondering if my toolkit is missing some specilised tools for this kind of work. This is my tool kit at the moment:
Flue brushes 3 sizes, 2 soft brushes
Long reach pozi and flat screwdrivers
Spanner / grips /long nosed (same as what I use on other jobs)
Bahco socket set
tubs/hoses
manometer, flue gas analyser
vessel pump
use my big wetvac for vacuming cr@p inside the boiler
multimeter
silicone lube

So pretty generic, I find alot of the time my tools are too big to get inside the boiler to get on the nuts and bolts, circlips are a big pain in the arse they are really hard for me to take off and put on. I've spoken to few old timers and they suggested getting a flexible socket set adaptor and a universal socket. I was also wondering about ratchet spanners they would seem better and smaller than shoving my adjustable spanner into a worcester junior

 

[JAH HEATING]

Stanley do a 66 piece set from toolstop

 

[kb76]

Can of air spray to shift the annoying cat that's decided to make a bed in your tool case

 

[Elgordo]

Spare length of manometer tubing for blowing through blocked Venturi and testing air pressure switches

 

[Billy Bob Bob]

Bought a big bahco ratchet box couple years ago got everything in it was a good Christmas deal! Are those wera allen keys any better than a standard allen key?

yes,they dont snap

 

[kay-jay]

Dont know what they are called but the bendy bits of ally covered in plastic are ace , lost mine ages since .
Bend them under a pump when removing and countless other things

Nerrad do them its called something like a multi funnel

 

[kay-jay]

http://www.plumbcenter.co.uk/product/nerrad-versa-funnel/

 

[kay-jay]

I find these invaluable
http://m.www.my-tool-shed.co.uk/p10...461&gpla=pla&gclid=CPyd8bCzwM8CFQUW0wodPW8OfA

 

[1Steven]

Tablet with Internet access!