Currently reading:
Blocked pipe between boiler and 1st rad

Discuss Blocked pipe between boiler and 1st rad in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

bennythedip

Gas Engineer
Messages
162
Hi all,
Looking for advice on clearing a blocked flow pipe. The pipe is definitely blocked with sludge but it's buried in concrete so I can't cut it out. Has anyone used a compressor to blow it out? Any other suggestions much appreciated.
 
Thanks for replies. It's not piped as bypass. I was going to remove rad and connect pipe on flow and pipe it to outside,then take off flow pipe at boiler and try to force it out with air. To re-pipe means having to lift a load of tiles in kitchen and do a bit of digging!
 
Status
Not open for further replies.

Reply to Blocked pipe between boiler and 1st rad in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Back
Top