temp

A temp track is an existing piece of music or audio which is used during the editing phase of television and film production, serving as a guideline for the tempo, mood or atmosphere the director is looking for in a scene. It is also referred to as scratch music, temp score or temp music.The track is usually replaced before release by an original soundtrack composed specifically for the film. While some feel that having to follow a temp track can be limiting for a composer, it can be a useful tool in finding the right style of music for a particular scene and can be a time-saver for both the composer and director.

View More On Wikipedia.org
Recent contents Top users
  1. T

    CH boiler temp? What's you're setup.

    what temperature should you set a modern condensing combi boiler too? I know in an ideal world you should try and setup so you get a return temp of 55 or lower for maximum condensing but what about if you want maximum heat quickly as possible to satisfy room stat? I normally measure the...
  2. A

    Baxi duo tec2 ga 28 kw combi hot water temp fluctuating .

    Hi guys, Was at a customers recently & they had problem with fluctuating hot water temperature. On the initial repair visit I changed the hall sensor & the flow turbine as this was quite cruddy when I dropped it out to check condition. New one came with brass block so just removed old one from...
  3. P

    UFH floor temp control

    Hello, We are having wet UFH installed across the ground floor of our house, about 5 zones. We'd like vinyl and timber and hence know we need to limit the floor temp to 27 degrees; question what are the ways to do this? We've seen the neo control system that can control on air temp and floor...
  4. H

    Does hot/cold pressure imbalance affect my mixer shower temp?

    I have a combi boiler (Vailant ecoplus) and a mixer bar shower. The taps in the rest of the house, including bathroom, get super hot on demand. The pipe behind the mixer shower are very hot to the touch and yet even woth the thermo valve on the mixer at full it is moderately hot at best. Ive...
  5. G

    IMI range tribune dn22 temp and pressure reliefvalve

    Just looked at an old unvented cylinder with an IMI range dn22 temp and pressure relief valve. The valve has a side tapping about 1/4'' in size. Its plugged with a short brass fitting with a spade shaped rectangle end. Its leaking through the center which means it has another thread inside. Can...
  6. M

    Pipe Frost Stats Temp advice please.....Please!!

    Hello I have a L641B1004 pipe Frost Stats andit was set at 25c in conjunction with a wall frost stat set at 5c. But its been going on/off every night afew times keeping me awake (I Know it has been cold these past few nights). Itis for a Glow-worm flexicom 15k which is in the Garage. Is it...
  7. J

    Does a boile descaler really work permanently or temp fix

    I have had a double dose of descaler in a system for about a week running a turbomax 828e which was kettling a little when started but perfectly fine once warmed up. It's almost there but wanted to find out if anyone has used a descaler n it's been fine for another few years as the kettling was...
  8. M

    Unvented Cylinder Water Temp

    Hi all, I will try to keep this as simple as I can. System - Gloworm Ultracom 30 HXI Boiler Megaflo CL210 Unvented Cylinder Problem - The temperature for my hot water is set to 60 degrees but it never gets over 50 degrees, I have tested the water temp at various taps and it also registers...
  9. U

    Thermostat not at correct temp?

    Not sure where the problem lies here, with the boiler/burner or thermostat. The thermostat runs from 0-35c, the problem is when its at 35c it feels like its at 20c, set it any lower than 35c and its pointless turning the heating on, I know I am not imagining thing as I have a weather station...
  10. D

    Noise - boiler cutting before reaching temp

    Hi all. first post here and not an expert so some of what I describe may not be termed totally accurate but hopefully will give the info so I can pick your collective experts brains on a number of issues which I think could be related... i have a conventional system. Main 24kw HE boiler...
  11. U

    How to independently control valiant boiler temp outputs?

    Hi to all, found the forum on my quest to better my current heating system. Seems the most knowledgable forum so a good start. Ok So my house is a 1970's 4 bed detached, upgraded cavity wall and loft and new double glazing. The system consists of a valiant Ecotec pro 630 system boiler...
  12. B

    28Cdi Hot Water Temp Increasing Before Shutting Off

    Good evening all, New joiner here and hopeful that you may be able to offer some advice regarding my 28CDi. THe CH side of things is fine however when there is a draw on the hot water the light turns on and you can hear the burners starting and then the water temp keeps rising irrespective of...
  13. A

    Potteton Gold 28he a reaches temp then goes on/off every ten seconds

    Anyone got a clue? My own Pot of Gold 28he a is throwing a curve ball. Started with with a hot water problem, overheating, so I cleaned the plate heat exchanger. On restart it now reaches temp on both heating and hot water exactly as it should, but upon reaching temp it stops and starts every...
  14. townfanjon

    Temp probes

    What do you guys use to test water temps while commissioning . I have been use ing the rothenberger type, what look like they belong in a cafe, they are not designed to get splashed with water , I knact another one today . thanks in advance
  15. S

    shower water temp issues

    Hi I have a mira excel exposed valve shower and am having issues with the temperature. The gauge doesnt seem to adjust it and i have attempted to increase the max temp by removing the handle but it was already at the max. I have since removed the cartridge as i was going to attempt to clean to...
  16. E

    IR temp measurement

    Alreet ladies. Any recommendations? Been looking at Fluke MT4 and 62. Thinking of 62. Any suggestions my £12 isn't cutting it any more
  17. E

    bath hot water temp

    Hi Guys, fitted a potterton 28 kw combi every thing works fine, but there is all ways a but. The hot water to the WHB, kitchen and showers great red hot, bath they do not have to put any hot water in, def a temp diff. Now all the pipe work is in 15, inc the bath which is first on the run and...
  18. K

    Vaillant Boiler stopped firing up when the temp reached 36 c with video

    Hi all Pro.... Vaillant Boiler stopped firing up when the temp guage reach 36 c. It started after I bleed all the radiators. The system has plenty of water in it, ie (1.25 bars), I have bleed and bleed the radiators to ensure that there is no air in the system yet still it won't fire. Hot water...
  19. A

    flue gas temp of Warmflow 90/120

    Hi chaps, What temp would you expect the flue gases to reach? Serviced one earlier and was surprised it only got up to 155c cheers dave
  20. P

    DHW Cylinder - What temp?

    Hi, I have a hot water cylinder and I would like advice on the what temperature to set it so as to protect my children from scalds (when they play with taps in the bath) and/or save money but not die from legionella. The system (valliant) has a legionella function. If the advice is to set...

Newest Plumbing Threads

Back
Top