Search the forum,

shower waste

A shower is a place in which a person bathes under a spray of typically warm or hot water. Indoors, there is a drain in the floor. Most showers have temperature, spray pressure and adjustable showerhead nozzle. The simplest showers have a swivelling nozzle aiming down on the user, while more complex showers have a showerhead connected to a hose that has a mounting bracket. This allows the showerer to hold the showerhead by hand to spray the water at different parts of their body. A shower can be installed in a small shower stall or bathtub with a plastic shower curtain or door. Showering is common in Western culture due to the efficiency of using it compared with a bathtub. Its use in hygiene is, therefore, common practice.

View More On Wikipedia.org
  1. A

    Will my bath or shower waste layout cause trap siphoning?

    Just wondering if this pipe layout might cause any trap syphoning from the shower or bath traps. Bath waste run is 2m x 40mm pipe from trap to tee, which connects directly to the soil pipe. The shower waste run is 1.5m x 40mm pipe and connects to a tee which is joined to the bath waste run and...
  2. D

    Shower waste via old toilet stack

    I’ve found an old toilet stack to a drain in a downstairs bathroom which was capped off. It’s still open and connects to my sewer line on my property. There is a man hole cover just outside and it drains. I want to drain my shower waste through it. If I make get a U bend and drain the waste...
  3. R

    Bath to shower waste and siphon danger?

    2 things please if I may: Trying to work out wastes for a bathroom fit. Shower will have a 40mm pipe run just under 3m into hopper. Considering teeing or angling a bath waste into this on the distal half. Would the bath definitely, maybe or not be likely to siphon the shower trap? Wondering how...
  4. P

    plumber required, experienced in all aspects of installation of walk-in/wetroom shower

    Hello, I am making an en-suite room and need a plumber who has experience in the following: Plumbing to new vanity unit and toilet. Fitting waterproof/resistant water board. Tank all shower area. Fitting Aqualisa Quartz shower unit. Installing shower waste outlet into concrete floor. Fit venting...
  5. J

    Shower waste above low point of shower tray

    Not all the water is draining after showering because the top of the waste is above the tray (See attached pic) its a 90mm trap and the top is 110mm diameter. if the top was around 100mm it would fit below the lowest part of the tray. Any advice appart from lathing down the top of the waste?
  6. elecnewt

    SEALING A SHOWER WASTE IN A STONE RESIN TRAY

    I have been recommended CT1 as a sealant for a shower waste. Is it recommended to apply sealant to both sides of the Neoprene rubber seal that is on the top surface of the tray and to both sides of the Neoprene rubber seal that is on the underside of the tray?
  7. L

    Bath / Shower waste problems

    Good evening. Looking for some advise. Im currently on a job fitting a new bath and shower. Id usually run individual waste runs for each. On this current job i have to use the old waste pipework, as i can't get to the soil stack as its been boxed in behind a wall and then a kitchen fitted...
  8. P

    HepvO and Wirquin 90mm Slim Shower Waste (Waterless Membrane) question

    I'm in the process of revamping a bathroom. At the moment it contains a toilet, basin and bath with an overhead shower. The basin and toilet share a common waste pipe which feeds into the soil stack behind the toilet. The soil stack is internal and boxed behind a stud wall in a corner and has...
  9. A

    Securing 50mm solvent weld shower waste pipe to wall

    Evening all, May sound a silly question but are there any tips for securing a waste that has minimal fall,i can get a couple of 50mm clips on the pipe but towards the end of the run the pipe is too close to the floor and the standard clips wont fit as its abovethe floor but just too close...
  10. M

    Can anyone identify shower waste

    Hi I'm trying to change the threaded collar (where the silver top clips onto - has 2 screws) as one of the tabs has broken and the top cover keeps coming off when showering. Please see pictures. Can anyone identify the threaded collar or know how I could repair the broken tab ? Any help or...
  11. A

    Shower waste pump

    We've just had a Sanifloor 3 shower waste pump fitted as gravity drainage wasn't possible. The pump does the job but is stupidly loud, it also turns on and off repeatedly with the water flow, which makes the noise more annoying. I'm a bit surprised that I've not found any other complaints...
  12. M

    50mm shower waste into horiz SVP. Picture option A, B or C...

    hello, I need help getting shower waste into horizontal svp. (outside of house) The 50mm shower waste (red circle) exits the building above the horizontal svp pipe (blue). This 'red' shower waste has already traveled 2.3m at the correct fall before it exits the building. Which option of pipe...
  13. M

    Can anyone identify this shower waste

    Hi I've managed to undo my shower waste replace the top cover where the silver cap clips onto as one of the tabs is broken. (I cannot get access to anything under the shower tray) I have had to put it back together still with a broken tab. I've been to 3 plumbers merchants but no one can...
  14. M

    Removing shower waste plug clamped to shower tray base

    Hi The aluminium plastic cover keeps coming off as one of the plastic plugs on the shower base has snapped off. I would like to remove the base which is clamped onto the shower tray. Please see photo. Does anyone know how I can get it off, I presume it unscrews anti clockwise but I don't see...
  15. T

    Shower waste pipe

    customer wants a flush level shower but the joists run the wrong way to route the waste. Any other ideas other than building a plinth that she is not keen on. She is saying just notch the joists errrrr NO
  16. P

    shower waste full of water is it normal ?

    Hello, I just had a new shower tray fitting with 90mm waste, I find strange that the waste cup is always full of water and also the pipe. The water is exiting the tray but not really fast. Is it expected? Picture below Thanks!
  17. J

    Advice for fixing bodged shower waste drain

    Hi there, I'm part-way through repairing the downstairs shower room after a leaking plug soaked through the plasterboard wall. I've taken out the plasterboard and prepped the walls with cement-board. The problem I still have is that the waste drain seems to be allowing moisture to soak up...
  18. B

    Shower waste - water very slow to drain

    Hi, water from my shower tray has started to drain very slowly, I investigated the drain but can't work out how the water escapes, there is no outlet hole in the bottom part of the drain that threads onto the top part of the drain (hope that makes sense, I am perplexed as to how the water has...
  19. P

    Shower waste trap

    I have a shower cabin and the waste trap has cracked and some bits have broken off hence it has started leaking. I tried to find a replacement but it seems to be a non standard size. The hole in the shower tray is 80mm - where the hell can you buy a replacement trap from of that size? Its...
  20. cr0ft

    Running shower waste to rainwater downpipe on combined drainage

    Hi all. For cosmetic reasons I would like to run a 50mm shower waste pipe directly into a 68mm rainwater downpipe at first floor level. There is a stack on the opposite side to the downpipe but it will look messy running the shower waste pipe around the drainpipe to meet it. Moving the...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock