open vented

An open-source ventilator is a disaster-situation ventilator made using a freely licensed (open-source) design, and ideally, freely available components and parts (open-source hardware). Designs, components, and parts may be anywhere from completely reverse-engineered or completely new creations, components may be adaptations of various inexpensive existing products, and special hard-to-find and/or expensive parts may be 3D-printed instead of purchased. As of early 2020, the levels of documentation and testing of open-source ventilators was well below scientific and medical-grade standards.One small, early prototype effort was the Pandemic Ventilator created in 2008 during the resurgence of H5N1 avian influenza that began in 2003, so named "because it is meant to be used as a ventilator of last resort during a possible avian (bird) flu pandemic."

View More On Wikipedia.org
  1. R

    hot f&e tank and boiler cutting out

    Hope you can help guys and gals. I have an open vented central heating system. Potterton prima 100 boiler, large pump pushing hot water round 3 channels: (1) Hot water, (2) upstairs rads (10 including 1 bypass) and (3) downstairs UFH via a manifold. The upstairs rads are controlled via...
  2. R

    Air Lock - Best Practice/Prevention ??

    Hello All I'm looking for some tips on dealing with air locks after a radiator change on a fully pumped vented hw/open ch system. Are there any good ways to prevent/minimise this?? How best to deal with an air lock on such a system?? Thanks in advance Cheers RSR
  3. C

    price for rads

    just a quickie what is the usual going rate for hanging and connecting customers new rads?
  4. T

    Indirect Unvented Cylinder losing pressure on heating side

    Hi Guys, I fitted a 210l indirect unvented cylinder a few weeks ago. It worked fine for about 2 weeks but no the customer is constantly having to fill up the system through the filling loop every night before they turn the heating on. When they wake up in the morning there is no pressure. It...
  5. A

    Removal of a Radiator

    Hi, I would like some help. A friend of mine has asked me to do a job for him which requires the removal of a radiator and to cap the pipework off at ceiling level. All there is is a hot water cylinder in the airing cupboard. The way i see it is to firstly shut off the cold main and hot water...
  6. J

    Noisy ch pump

    Scottish gas fitted a new condensing boiler into our ch system two years ago. We had problems with "rushing water sounds" when pump started and banging and knocking noises up until the pump was replaced last February. We were told to keep venting the radiators for a few days (it took some...
  7. J

    Help fitting thermostatic rad valves

    Hi all, I've come to the forum to ask for some advice about retro-fitting TRVs to all the rads in my house. I'm confused about fitments since when I went to buy the valves, they seemed to come in an odd size when compared to what I have at the moment. I am pretty sure that my heating uses...
  8. S

    poor flow from open vented cylinder

    hello all been to a new build install where cylinder is on the same floor as the bathroom and im not even getting 2litres/minuite from a flow cup with no flow restrictors in any taps. the downstairs kitchen and basin in the cloaks are giving around 5 litres a minuite but this is probably due to...
  9. P

    new motorised valve, look warm water & rads

    I have replaced the mid pos 3way valve on an open vented system (hot water would not heat without heating rads)& this partialy cured the problem but now water & rads only warm. When i replaced the valve i tried to do it without draining,just closing all wheel head valves to isolate, but one must...
  10. G

    after draining radiator , to paint behind.

    hi guys, my house has not got a combi boiler , it has a big tank in the cupboard and a back boiler fingymajig . you might have guessed by now im no plumber:cool: anyways , i closed the valves on a radiator and drained it so i could remove it and paint behind , which i have now done ...
  11. L

    solid fuel query.

    Could anyone tell me is there much work involved in taking out a HAMCO solid fuel stove and replacing it with one of those pot belly solid fuel heaters. The Hamco stove does hot water and heats the rads as well,and is linked up to an oil boiler. Is it just a matter of draining the system down...
  12. W

    problem with 28i worcester HE

    fitted new W28i condensing boiler in bungalow,combi conversion,anyway 2 weeks later customer says pressure dropping,goes back cant see any leaks anywhere pipes run in drops from ceiling in walls checked all valves all visable pipework nothing ,checked boiler prv/con pipe nothing put leaksealer...
  13. M

    central heating heat exchanger

    does anyone know where i can find information on a central heating heat exchanger its designed so it allow you to mix an open vent system to a sealed system, on one side you have the one system and the one on the other and as one passes through it takes the heat from that and transfares it to...
  14. M

    need someone to answer a question

    have an open vented system, when the pump is on, and i go to bleed the highest radiator the system is sucking in air and no water is coming out. what can the problem be, many thanks mark
  15. P

    Solid fuel boilers, UK v Europe

    Lets see what my peers think of this, you will have to open the links (marked "Produit") to see what I am on about, never mind the French, pictures speak louder than words Solid Fuel Boilers, and the differences between, Open vented central heating systems, and Closed or Pressurised central...
  16. P

    best place for magnaclean

    Where is the best place on an open vented system to fit one? Thanks
  17. V

    Trianco Anthracite boiler leak .

    Hi everyone , would be gratefull for your thoughts on this one . Yesterday my neibours boiler started leaking from inside the firebox . He rang me , I went around and drained the system and told him that he needs a new boiler . But as he has just had a delivery of anthracite and he says that...
  18. A

    Auto air vents on Hot water

    Had a few problems with air in my hot water recently and I was just wondering if you can install a auto air vent on to a hot water pipe? Thanks in advance Adam
  19. B

    What have you done today at work?.

    I removed this 280 Worcester bosch, and replaced it with this Viessmann Vitodens 200 series 35kw combi boiler, ugly but a very very special piece of Germanic engineering.
  20. F

    Prv

    Hi Can anyone tell me what this fitting is, going by the spring inside i believe it to be some sort of pressure relied valve however its instaled on am open vented system i often see them fitted on the flow of myson apollo's and baxi solo's however ive never been told actually what they are and...
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock