Search the forum,

connected

Connecting America: The National Broadband Plan is a Federal Communications Commission (FCC) plan to improve Internet access in the United States. The FCC was directed to create the plan by the American Recovery and Reinvestment Act of 2009, and unveiled its plan on March 16, 2010.The act did not give the FCC specific jurisdiction to carry out a national broadband plan or to amend the universal service provisions of the Telecommunications Act of 1996, but it required that the FCC draft a plan to "include a detailed strategy for achieving affordability and maximizing use of broadband to advance consumer welfare, civic participation, public safety and homeland security, community development, health care delivery, energy independence and efficiency, education, employee training, private sector investment, entrepreneurial activity, job creation and economic growth, and other national purposes."An official website for the plan, broadband.gov, highlighted energy and environment features. Other goals listed were "21st century care", "economic opportunity", "health care", "civic engagement" and "public safety". Broadband maps, tests and reporting of "broadband dead zones" were also featured. Another goal was providing 100 million American households with access to 100 Mbit/s (megabits per second) connections by 2020. Large areas of the United States would be wired for Internet access, and the federal Rural Utilities Service providing some rural areas with landline telephone service would be upgraded. The plan called for broadcasters to give up spectrum for wireless broadband access.The author of the requirement to draw up the plan, U.S. Representative Edward J. Markey (D-MA) praised the FCC's plan as a "roadmap" that would "ensure that every American has access to the tools they need to succeed." The Obama administration promoted the plan, and former FCC Chairman Julius Genachowski, named the plan "his top priority".

View More On Wikipedia.org
  1. B

    Could this be valve fore draining heating system?? See picture

    could this be the valve for draining down the central heating system. There is a pipe outside the back door leading up to the airing cupboard and seems to go to this valve.
  2. KingDoey

    Hob connected by builder...

    Fitted boiler at job last year. Customer rang as meter had been moved and wanted to be reconnected. Hob had been fitted a few months ago by her 'handyman/builder' Hope your all having a fantastic week!
  3. D

    No hot water

    Hi, My wife and I have just bought our first flat and there's absolutely nothing coming out of the hot water tap in the kitchen and just a dribble in the bathroom. The cold taps are fine and as far as we can tell the boiler is working. We wondered if it might be an airlock so tried forcing...
  4. C

    All bathroom appliances connected to the pump???

    Hello, I recently had a situation after a plumber came and did a job for me. He connected the water pipes through the toilet,basin and the shower. I was bringing another plumber and asked two more if the pump should be connected through the toilet and the basin too and they said no. I want to...
  5. K

    boiler man/sparky - can anyone tell me if this is wiring is correct: google nest

    Hey guys Moving out of my flat tomorrow and I have to return the property to the orginal spec as part of my lease. I had google nest installed a while ago but cant remember how everything was originally connected. I've had a go at removing the nest and putting back the old thermostat...
  6. Z

    Why is bathroom radiator connected to hot water tank

    I have an old oil fired central heating system. I keep the hot water/central heating permanently on all year round. And at this time of year the thermostats on the radiators are set to zero or one/two. Because the water is constantly on it means the bathroom radiator that is connected to the...
  7. D

    Does a duel fuel radiator need a thermostatic control as well as an element

    I've just had install a duel fuel radiator in my bathroom with a Terma heating element installed. The rad is also connected to my central heating system in the same way all my other radiator are. However, all my other radiators in the house have a thermostatic controls ( apart from the one...
  8. D

    Suitable Pump for Pressure Tank

    Hi – We are looking a number of options to resolve our water pressure issues in our house. We've seen the following pump Stuart Turner Monsoon Extra Universal 5.0 bar Single, which appears to have amazing pressure capabilities, up to 5 Bars. We have 3 bathrooms with large shower heads and a...
  9. P

    valve connected to hot water tank, how open?!

    Hi, This is the valve (the red one) that opens the hot water (two pictures). It is connected to the water tank in the up stair's cupboard. I noticed the valve was only 1/4th open (perhaps the last plumber who repaired the system left it like that). Should this be fully opened? Does this have...
  10. A

    Downstairs rads on own loop?? Not draining out with others,

    Hi Guys and Gals, I need your wisdom again if you could be so kind! I'm doing a bit of work on upstairs rad so draining down my combi boiler system. I picked a downstairs rad that was closest to the door, connected hose, opened valve, went upstairs opened nipples etc. All went well draining...
  11. W

    How to tell if bath waste connected to soil stack

    In first floor flat (built 1980's) the bath waste pipe goes through the wall very close to where the soil stack is. It's all behind boxed in work. Is there any way to tell if the bath waste is connected to the stack or the pipe goes out to a gully without having to rip up a lot of boxing in...
  12. T

    CH pump overrun

    Boiler is a WB Greenstar CDi conventional 40. Pump is connected to LzNz. The pump runs constantly ie provided the boiler has power, the pump runs. Any suggestions as to what needs to be done so that the pump cycles till the boiler cools and then switches off. Tom
  13. A

    Single Room Underfloor Heating

    Hi All, I have installed UFH in my kitchen extension. Problem is to get it started. I can feel that hot water is going trough pump, but no heat water is coming back. So I thought either it's connected wrong or I have a air in the system. Please see file attached with pipework explained. So this...
  14. S

    Oil tank - fill with boiler not connected (yet)?

    Hi Guys, I'm having a new oil CH system installed from scratch. The installer has fitted the new tank, but has yet to do the boiler and rads. He has fitted the tank filter valve, and sealed off the pipe outlet with a 3/8 BSP blanking plug. He has asked for me to get an initial fill of 500...
  15. Chalked

    Good example of why we test with appliances connected.

    Brand new Vaillant system boiler. New build house with inset gas Fire,cooker and boiler. 10mb drop! last thing I isolated was the boiler.
  16. U

    Will this work?

    My plumber has come up with this solution to an admittedly tad complex piping challenge. But I cannot see how the horizontal section will not result in waste accumulating there, on the main channel temporarily due to lack of maximum flush pressure; and on the inspection arm simply as it's a...
  17. C

    British gas UP2 not working properly

    Hi all, I moved house a few weeks ago and seem to be having a problem getting the central heating to stay on when the hot water is switched on. I have the british gas UP2 controller with the wireless WR1 and a danfoss hsa3 valve/actuator. If I press the select button and put the hot water to off...
  18. B

    Hob connected with micro point hose

    Is this acceptable? Always thought hobs were to be rigid pipework
  19. M

    Strange programmer wallplate wiring - no HW

    Hello, Hopefully someone might be able to assist me! I've been playing around with my new Tado (smart thermostat) system and have noticed something odd that the HW turns the CH on but doesn't heat any water. I recently moved into the house and the previous owners just ran the HW off the...
  20. B

    Underfloor & Gas Central Heating Engineer Req'd - HARROW

    Hi all Im looking for a certified gas central heating and underfloor heating specialist in the Harrow (Middlesex) area. I have an underfloor heating system that id like checked out - one of the rooms on the ground floor only ever seems to heat half the room. Additionally as of today, my...
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock