flue box

[desrob]

can you connect a flexi liner direct to box,if you can how do you fit a 5 inch liner into mf10 vent on top of flue box ,what a mission, is there a knack

 

[Billy Bob Bob]

got a link for the intended flue box?

 

[diamondgas]

What's an mf10?

It's been a long time since I've seen a purpose made flue box desrob but the one's i remember came with a collar on the top to self tap the liner too! What does the one you have in mind have?

 

[Billy Bob Bob]

What's an mf10?

It's been a long time since I've seen a purpose made flue box desrob but the one's i remember came with a collar on the top to self tap the liner too! What does the one you have in mind have?

that would be a collector normally only suitable for outsets i think desrobs looking at a twin walled ILFE box

 

[desrob]

What's an mf10?

It's been a long time since I've seen a purpose made flue box desrob but the one's i remember came with a collar on the top to self tap the liner too! What does the one you have in mind have?

on the top of twin walled flue box is a mf10 gas vent,like your collar,it's a tight fit for my 5 inch flexi liner if a flexi liner can go straight on to gas vent or as i was informed "i think wrongly"it has to be a ridgid

 

[diamondgas]

that would be a collector normally only suitable for outsets i think desrobs looking at a twin walled ILFE box

Flue liner says to me old fireplace, no twin wall, maybe wrong ... What do you mean by "outsets" mate? never heard that before

 

[diamondgas]

on the top of twin walled flue box is a mf10 gas vent,like your collar,it's a tight fit for my 5 inch flexi liner if a flexi liner can go straight on to gas vent or as i was informed "i think wrongly"it has to be a ridgid

Can't you get a twin wall to copex adapter? Is it ritevent? As far as i remember you have to make any joints accessible for inspection?

 

[desrob]

Flue liner says to me old fireplace, no twin wall, maybe wrong ... What do you mean by "outsets" mate? never heard that before

radiant etc ?

 

[diamondgas]

radiant etc ?

Ahaaa!!!!!! Not 'in'set :lol: Well yabugga!

 

[desrob]

Ahaaa!!!!!! Not 'in'set :lol: Well yabugga!

the welsh accent put ya off

 

[desrob]

to be honest the jobs a nightmare, from the flue 5 inch mf 10 gas vent i need to connect to a dunbrik exit clay liner with a inside id of 160mm.....help.

 

[Billy Bob Bob]

Flue liner says to me old fireplace, no twin wall, maybe wrong ... What do you mean by "outsets" mate? never heard that before

by twin wall i mean the box its self is twin walled and normally the spigot is as well,by outsets as in outset fire,all the SFL branded boxes i have seen are either single walled collectors for use with liners or double walled boxes for selkirk twin walled pipe

 

[diamondgas]

Do you need to line the clay flue desrob? can you get away with putting twinwall into it then sealing the space remaining?

 

[desrob]

by twin wall i mean the box its self is twin walled and normally the spigot is as well,by outsets as in outset fire,all the SFL branded boxes i have seen are either single walled collectors for use with liners or double walled boxes for selkirk twin walled pipe

radiant mi asks for twin walled box,and min125mm flexi liner..?

 

[desrob]

Do you need to line the clay flue desrob? can you get away with putting twinwall into it then sealing the space remaining?

i hope so rope and high temp cement, but to be honest and back to original thread i can't even get the liner into top of flue box 125mm flexi liner flue box with a mf10 gas vent.