Baxi Neta Tec - anyone fitted one yet?

[Heating-eng]

Just thought I'd add a reply to this thread - I was the chap that had the Neta Tec fitted by Allen with the dodgey divertor valve connection.

Two months on the boiler is now working fine - It was a total nightmare at first but it seems that the little screw was the issue. Allen tried his best to sort it and was up for coming back at all times of the day to try and get it going for me without charging any extra.

The whole situation was just unfortunate but it is working well now. I would recommend Allen.

Thanks Mark
Should be ok now. Baxi did come out quickly and the boiler was repaired in less than a week even with the issues.
all these boilers now come with a screw in..

 

[Barry98]

still waiting on them to attend a call from two weeks ago customer still no hot water , already had the offical email cant wait to go to court. baxi=wenolongercare about the little people

 

[Heating-eng]

still waiting on them to attend a call from two weeks ago customer still no hot water , already had the offical email cant wait to go to court. baxi=wenolongercare about the little people

There must be more to that than you are letting on.
they have always come next day for me and sorted problem.

 

[Barry98]

feel free to come along fella not far from you in bradford. theyve been back to it 3 times i think now. new pcb new gas valve and no replacements there refusing to go saying customer is lying

 

[Barry98]

this was my orignal post

COME on every body help so my aprreciation with around of appluase for the great engineers at heatteam based in my area

i made the biggest mistake by staying loyal and fitting one of these for a good friend . loads of problems , new board new gas valve new divertor another call at weekend from cusotmer no hot water Again , booked a call through the ever so helpfull WORKS scheme customer just rang there refusing to go out as theres nothing wrong with it and ive undersized it , funny that the other 33 i fitted last year in same sized propertys all work.and this one is hit and miss

rant over does anyone have any of any organ grinders emails/phone numbers as the rep and enginner who made this statemnt wont take my calls.

cheers EX LOYAL installer to baxi

off to find my axe

 

[panholio]

Is there a small screw in the connection to the divertor valve?

Although they would have water and no heating.

 

[Heating-eng]

feel free to come along fella not far from you in bradford. theyve been back to it 3 times i think now. new pcb new gas valve and no replacements there refusing to go saying customer is lying

What's the problem ..

 

[luke2702]

Sorry for the thread resuraction!!

I have just fitted another one of these boilers into one of my bosses house's, the boiler at 1st ran perfect. Then the boss came and ask me to fit a wireless controller. Fitted controller the same way as i did mine (which has worked perfect), re-instated the power to the boiler and the boiler fired. Problem is it is showing a e 83 fault code even though the boiler is running!! Anyone any idea?? Baxi was shut by the time i had finished.

 

[Poxi]

E83 is Wireless stat wired wrong.(Or something to do with the remote stat)

Have you removed the yellow link wire under the terminal cover if it was there.

 

[luke2702]

Yellow link removed, stat is talking to the controller. But not to boiler. I have removed the wiring to the stat and put the yellow link back in and Fault e83 is still present.

Its a basic siemens remote controller. So dont know were it could be wrong...