What we all working on this week ?

[king of pipes]

I have a insurance job to try and rescue a poorly installed quad shower the customer wants to save the tiling if possible and has a few spare so fingers crossed it may work , the loss adjuster allowed em £1500 that will just about cover materials. Kop

 

[king of pipes]

Finished off the shower room just the screen to fit once the decorating is completed . Fitted some bathroom ventilation. Kop

 

[Scott_D]

Ideal logic max 24 combi

 

[Scott_D]

Leaking steel gas pipe as it enters the property so had to repipe externally

 

[EvilDrPorkChop]

On with this, day 10. Bit of a nightmare tbh. Guy is really fussy, and has bought the worst tiles we’ve ever worked with. Not cut straight, edges not square, length not cut square, and bowed like a banana. Be glad when it’s finished.

 

[king of pipes]

On with this, day 10. Bit of a nightmare tbh. Guy is really fussy, and has bought the worst tiles we’ve ever worked with. Not cut straight, edges not square, length not cut square, and bowed like a banana. Be glad when it’s finished.

Looking good Mr Evil bit of a challenge for you

 

[ShaunCorbs]

Nice easy kitchen tap replacement until that decided it didn’t want to be on the pipe no more due to not being soldered and being in an l unit in the corner ffs

 

[SimonG]

Message over the weekend, old oil Beta not working, no power to it.
Gets there this afternoon, fuse spur OK, power at timer and pump runs.
Boiler as dead as a fart.
Incoming power cable goes through case and round back of boiler, grabs cable and gently pull.
Hey presto end of cable not wired in anywhere. (Bearing in mind I fitted a new motor on the burner two weeks before Christmas and it was all good when I left).
Cable not pulled out as all in good condition and ready to be wired back in.

Nobody had touched it, according to customer.

But it didn't unwire itself.

Strange.

 

[EvilDrPorkChop]

Message over the weekend, old oil Beta not working, no power to it.
Gets there this afternoon, fuse spur OK, power at timer and pump runs.
Boiler as dead as a fart.
Incoming power cable goes through case and round back of boiler, grabs cable and gently pull.
Hey presto end of cable not wired in anywhere. (Bearing in mind I fitted a new motor on the burner two weeks before Christmas and it was all good when I left).
Cable not pulled out as all in good condition and ready to be wired back in.

Nobody had touched it, according to customer.

But it didn't unwire itself.

Strange.

I went on a course years ago, and the only thing that stuck with me was 'The general public are liars and never believe what they tell you'. Mr invisible must have removed it.

 

[EvilDrPorkChop]

Grouting today chaps, coming together a bit now

 

[Scott_D]

Some fancy rads

 

[Deleted member 120897]

No photos, but fixed a troublesome boiler (3 years old and new pump!) and did some wire tracing for a room thermostat - love those types where you have to use your brain a bit

 

[Scott_D]

Grouting today chaps, coming together a bit now

Looks lovely.
Is it black or grey grout?

 

[king of pipes]

Grouting today chaps, coming together a bit now

Well smart that one bud looking forward to the finished pictures. Regards kop

 

[Last Plumber]

Boilers and Water heaters in nursing/care homes for next few week.
With all due respect to these places, I hope i'm not seeing a glimpse into my own future.

I imagine myself old, frustrated and trying to gain access to a plant room.


Hang on.............!

 

[EvilDrPorkChop]

Looks lovely.
Is it black or grey grout?

They've gone for Silver Grey Mapei (Picture was before grouting).