Discuss What we all working on this week ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Meant to add this photo yesterday.
View attachment 44856

2nd drop nearly done.
View attachment 44857
[automerge]1596735310[/automerge]

Pulley attached to ladders?
Plenty of silicone grease then?

Like them double bends at the bottom :)
[automerge]1596735537[/automerge]
Meant to add this photo yesterday.
View attachment 44856

2nd drop nearly done.
View attachment 44857
[automerge]1596735310[/automerge]

Pulley attached to ladders?
Plenty of silicone grease then?

Anchor at the top where the brick jumps out then a 4-1 pulley and yes plenty you even have to insert a plug first to make it easier for the pipe to go in, so plug in lube the pipe up remove the plug insert the pipe around 40kg of pressure needed (roughly) helps if the rubbers are warm will take a pic of the fitting tomorrow
 
Like them double bends at the bottom :)
[automerge]1596735537[/automerge]


Anchor at the top where the brick jumps out then a 4-1 pulley and yes plenty you even have to insert a plug first to make it easier for the pipe to go in, so plug in lube the pipe up remove the plug insert the pipe around 40kg of pressure needed (roughly) helps if the rubbers are warm will take a pic of the fitting tomorrow
What does a length of pipe weigh?
 
Larth and plaster wall needed a heavy designer rad fixed to it today pita but got it done
 

Attachments

  • inCollage_20200806_183638485.jpg
    inCollage_20200806_183638485.jpg
    160.3 KB · Views: 19
Toilet overflow ?? Any reason

C'mon, I repiped the cold and got rid of the boxing on the wall under the window.


Seriously though, didn't want to pay for a new syphon, even though I had the toilet apart.
I would have changed it, but there you go.
Sods law, is it may need one now anyway.
[automerge]1596739101[/automerge]
The floors the best bit, nearly a full tile, 65mm, from one side to the other. I said I could level it, but again didn't want to pay.
 
Around 20 kg for 1.8 and 35kg for 3m

On your own Shaun, you must have some 'guns'?
[automerge]1596742511[/automerge]
Larth and plaster wall needed a heavy designer rad fixed to it today pita but got it done

Nice one bud, where there's a will there's a way! :)
[automerge]1596742647[/automerge]
Finally finished off the one from the other week.

Remind's of the old pub's with green, blue, red or brown glazed bricks!
[automerge]1596743010[/automerge]
Toilet overflow ?? Any reason

:)

C'mon, I repiped the cold and got rid of the boxing on the wall under the window.

Seriously though, didn't want to pay for a new syphon, even though I had the toilet apart.
I would have changed it, but there you go.
Sods law, is it may need one now anyway.

Cor I've wrestled with a few cc cistern overflow's in my lifetime - was great when England approved internal overflows (warning pipes) - on the other hand how much water is wasted down the pan every year........??
 
Last edited:
Cor I've wrestled with a few cc cistern overflow's in my lifetime - was great when England approved internal overflows (warning pipes) - on the other hand how much water is wasted down the pan every year....??

I think people tend to get them fixed quicker with the internal overflows.

But it's one of those jobs where its dripped for 4 months but it's an emergency at 4.00 on a friday afternoon.
 
On your own Shaun, you must have some 'guns'?
[automerge]1596742511[/automerge]


Nice one bud, where there's a will there's a way! :)
[automerge]1596742647[/automerge]


Remind's of the old pub's with green, blue, red or brown glazed bricks!
[automerge]1596743010[/automerge]


:)



Cor I've wrestled with a few cc cistern overflow's in my lifetime - was great when England approved internal overflows (warning pipes) - on the other hand how much water is wasted down the pan every year....??
C'mon, I repiped the cold and got rid of the boxing on the wall under the window.


Seriously though, didn't want to pay for a new syphon, even though I had the toilet apart.
I would have changed it, but there you go.
Sods law, is it may need one now anyway.
[automerge]1596739101[/automerge]
The floors the best bit, nearly a full tile, 65mm, from one side to the other. I said I could level it, but again didn't want to pay.

:D always the same they pay for some stuff and say keep the old kit

Naa has the old man with me holding the rope from the pulley f doing cast on my own been there done that takes longer
 

Reply to What we all working on this week ? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top