Vaillant Turbomax noise

[Scott_D]

Went to do a gas safety check on a Turbomax today
It’s fine in CH
Makes this groaning noise in HW if the temp dial is above half way.

Diverter?
Doesn’t seem to have a bypass

 

[Scott_D]

Can’t seem to add the video clip

 

[Riley]

Click upload a file

 

[Scott_D]

Click upload a file

Says error
Will try on the laptop in a bit

 

[ShaunCorbs]

needs to be utube mate then upload the link dans working on direct upload but not ready yet

 

[Scott_D]

needs to be utube mate then upload the link dans working on direct upload but not ready yet

I cant upload to youtube either, I use to be good with technology

 

[ShaunCorbs]

I cant upload to youtube either, I use to be good with technology

send it me mate will sort it

 

[Scott_D]

send it me mate will sort it

Where do I send it?

 

[ShaunCorbs]

sorry its late

 

[Scott_D]

Thanks @ShaunCorbs

 

[AMGasServices]

Are you referring to the band saw noise? Is the noise coming from the combustion chamber?

If so could be pump or fan. Try oiling the fan see if it makes a difference get it and replace it.

 

[Scott_D]

Are you referring to the band saw noise? Is the noise coming from the combustion chamber?

If so could be pump or fan. Try oiling the fan see if it makes a difference get it and replace it.

It’s fine in heating and HW if the temp dial is below half.
Only happens if the HW temp is turned up

 

[Steve weightman]

Have you gas analysed could be the gas valve that needs a tweek

 

[Scott_D]

Have you gas analysed could be the gas valve that needs a tweek

Readings are pretty god for an old girl

 

[Scott_D]

I’m struggling to find the correct MIs for it
Couldnt workout if it had a bypass