Tap gland

[Simone]

Hi, trying to change the tap glands on my bath taps and I’ve undone the gland easy enough but it won’t pull out of the tap I put it all back together as I didn’t want to force it, does the other hex part of the tap have to be unthreaded as it looks like an extra flange, thanks

 

[Aquarius]

Do you know if they’re compression type (sounds like it) or quarter turn?

 

[Simone]

Do you know if they’re compression type (sounds like it) or quarter turn?

Hi, they’re compression type on some old bath tap’s, not sure if I should spray some silicone spray or something and pull again.?

 

[Aquarius]

It’ll just be the rubber washer stopping it, just pull a little harder and then remove the remnants of the washer.

 

[Simone]

It’ll just be the rubber washer stopping it, just pull a little harder and then remove the remnants of the washer.

I’ll try again another day, I didn’t know if it was something to do with what looks like maybe an adaptor to go from 3/4 to 1/2 as you can see another hex nut in the picture but I wouldn’t of thought that would be stopping it coming out.