Search the forum,

Discuss Rattling Radiator when closing door in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
P

Peter Clarke

Just checking to see if this is anything to worry about?. I replaced a 500x500mm double radiator at the beginning of April. The radiator was fitted to a stud/plasterboard wall. I fitted the brackets to the plasterboard with the hollow wall anchors. The radiator all went in fine. But recently I have noticed when I close a door next to the radiator, the radiator itself rattles. Is this something to be worried about?. It only seems to of started recently. Could it just be the grills in the radiator or the side panels?.
 
u might want to change the bolts and fixings just to be on the safe side
 
yes the plastic clips are definitely on there. First thing I did before putting rad on bracket was to make sure they on.
 
Status
Not open for further replies.

Reply to Rattling Radiator when closing door in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all I'm hoping someone can shine a light on this for me Since our stop tap on the pavement has now been filled with sand for whatever reason, we are relying on our property fitted stopcock (this is outside on our garage wall) Unfortunately turning this to the closed position only reduces...
Replies
3
Views
245
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
324
I have a plumber coming tomorrow to change a cartridge on a badly dripping tap on my bathroom mixer unit. There is no separate isolating valve for this tap so I'll have to close the stopcock. I tried closing it today but it won't go absolutely 100% closed and there is still a very slight flow...
Replies
1
Views
236
Hi All I have a leak coming from within my Mira Elite QT shower. It seems to be flowing from behind the switching Control. Any ideas what could be causing this leak. Already Changed the Pump Elbow as one of the clips had popped which was causing a second small leak, Any idea? Is it time to buy...
Replies
0
Views
232
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock