Search the forum,

Discuss Powerflush or Magnacleanse? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

C

Chris Irish

Hi. I had issues with cold spots four years ago and had a Magnacleanse done. This caused a few pinhole leaks and I got new radiators. I've just had my boiler serviced and had no issues. They have recommended a powerflush (more expensive) whilst the guy who did the Magnacleanse has said he can do it again. It's a three-bed two storey with eight radiators. Any advice is greatly appreciated.
 

Reply to Powerflush or Magnacleanse? in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
127
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
123
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
322
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock