M10 stud cut to length

[Nostrum]

Does anyone know where you can buy pre cut M10 stud (40,60,80mm ish) ?

Do Geberit do a stud cutter attachment for press tools, I know REMS do?

killing grinder blades and not ending up with a very clean cut!

 

[Ray Stafford]

We do it pre-cut. Any length you like, so long as it is 2m.

 

[Scott_D]

JTM Pipeline Thread Steel BZP Studs - JTM Pipeline from JTM Plumbing Limited UK

 

[Nostrum]

Perfect, thanks Scott.

 

[turnpin]

We do it pre-cut. Any length you like, so long as it is 2m.

And once you pay for it you can have it as long as you like.....regards Turnpin:smilielol5:

 

[hammers4spanner]

Pipecenter in plymstock plus bas use to do it

 

[hammers4spanner]

Does anyone know where you can buy pre cut M10 stud (40,60,80mm ish) ?

Do Geberit do a stud cutter attachment for press tools, I know REMS do?

killing grinder blades and not ending up with a very clean cut!

By a rod chopper thats what i did then quick file of the end , wind on nut if it sticks give it a whack the nut usually flies on .

 

[Nostrum]

I was looking at that but the cutters are £150.

Easier to buy the pre cut rod for usual sizes and keep a couple of lengths free for longer sections, can cut them with grinder.

 

[hammers4spanner]

I use to bill any extra tools i needed for certain jobs to builders so never use to worry about it to be fair.

 

[rpm]

Put the nut on the studding past where you intend to cut first then as you unwind the nut off the studding it cleans the burr for you.

 

[gasmanrob]

eBay £50

 

[Nostrum]

Put the nut on the studding past where you intend to cut first then as you unwind the nut off the studding it cleans the burr for you.

Good shout but it's still easier buying it pre cut!

 

[Nostrum]

eBay £50View attachment 23166

Is that on there now? I've seen them second hand for more than they are new!

 

[hammers4spanner]

Not always sometimes it is but depends on pipe runs

 

[lame plumber]

jesus, no one use a mini hacksaw now a days