Search the forum,

Discuss LGSC with unsafe oven in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Steve weightman

Gas Engineer
Messages
186
Hi chaps just one of those situations where you tend to doubt yourself when condeming an appliance. I've AR'd a range oven with five gas rings two knobs are missing and all the numbers on all rings have rubbed off on the front of the cooker plus the cooker has no fsd.
 
Can you order the control knobs?
I doubt it its quite old and never heard of the name Technik even if you could there's no markings on the front oven panel

20190820_163127.jpg
 
Tecnik parts here, don't know if your model is listed;

Those knobs show as NLA. ;
 
Tecnik parts here, don't know if your model is listed;

Those knobs show as NLA. ;
The oven and grill knobs are on there but not the hob which are NLA close but close enough but thanks for the link.

Screenshot_20190824-115943_Samsung Internet.jpg
 

Reply to LGSC with unsafe oven in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended floor. Pic 1 is inside porch, pex temporarily clipped to give an idea of pipe placement (ignore shoddy blockwork of booted cowboy builder!), Pic 2 is...
Replies
6
Views
221
IS IT POSSIBLE TO ADJUST THIS MIXER UNIT? WE HAVE TO HAVE IT TURNED ALMOST FULLY ANTI CLOCKWISE TO GET HOT WATEROUT. THE FRONT PLATE WITH MIRA ON IT PRISES OFF AND INSIDE THERE ARE SOME PLASTIC BITS AND A SMALL CROSS-HEAD SCREW IN THE MIDDLE. THANKS
Replies
6
Views
224
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock