Currently reading:
Heating for new extension

Discuss Heating for new extension in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
U

Unregistered

Hello


Our current house is a 4 bed detached with radiator heating and a combi bolier - a Worcester Greenstar Highflow 440 fitted in 2007. Boiler is working fine.


We are in the middle of having a significant extension on the ground floor - 70 to 80 sq m of new space. Extension will have underfloor heating. We are also having underfloor fitted in the existing kitchen.


Plumber has proposed moving to a unvented pressurised cylinder system as we have a number of bathrooms. This also means a new boiler and a Worcester Greenstar 24ri has been proposed.


I'd be really grateful for some advice:


1) My research suggests the new boiler has a lower output than the old one - is this sensible?


2) Quote received is for supply and fit boiler, supply and fit 300 litre unvented pressurised cylinder, connect up under floor system and join to existing heating and hot water system. Supply and fit new 22mm water main pipework to boiler from stop tap. £3,850. Is this in the right ball park? We live in Rugby.


3) Would the existing boiler have any resale value i.e. e-bay?


Thanks


Adam
 
Hi adam please register and repost to receive responses to your question. Thanks
 
Status
Not open for further replies.

Reply to Heating for new extension in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock