Discuss Choice of heat only boilers in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Sue66

Gas Engineer
Messages
41
Hi guys,

Need to install a new heat only boiler for an f&e system with a currently condemned potterton kingfisher.

It's a five bedroom house with two bathrooms and a hot water tank in the kitchen next to the boiler and gas meter. What boiler would you suggest? I normally like ideals but I've only so far installed combis as I've only been qualified a year so any advice appreciated. Cheers.
 
Ideal do a range of heat only boilers . Cheers Kop

Screenshot_20180821-223148.png
 
Bear in mind, that whatever boiler you end up putting in, most need a pump over run( the boiler controls the pump, not the wiring centre) so you will need to run a wire from boiler to wherever the pump is located ( could be in an airing cupboard) and some distance away.

Cheers
 
I have to say intergas heat only, very straight forward to fit and commission, small and compact. Serviced a few and feedback is excellent from customers. I’m not keen on combi or system as the fixing plate with vessel doesn’t look or ease of installation not engineer friendly.
Hope this helps
 

Reply to Choice of heat only boilers in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock