20mm sink waste outlet conversion and either 1" or 20mm chrome cap nut supplier

[craigskelly]

I have a couple of issues that I would like some help with please.
The first one is with converting a chrome 20mm (may possibly be 21mm) sink waste outlet pipe to either 32mm or 40mm for connection into a 110mm soil stack. Can someone please point me in the right direction of a supplier who is able to provide a suitable adapter (black).
The other is with sourcing either a 1" (preferred) or 20mm chrome cap nut for a bath/shower tap. I have removed the shower attachment and could only quickly obtain a 20mm brass cap nut which I would like to replace with a chrome unit but ideally I would like to remove the shower cradle (which feeds the shower outlet) and to do this I would need a 1" chrome cap nut - again, is anyone able to point me in the direction of a supplier for this?

 

[dancinplumba]

you tried google ?

 

[acecharly]

Some kind of mcalpine fitting may help adapt

 

[acecharly]

Like this...

 

[rpm]

Seem to remember this from last week? If not then very similar.

 

[ShaunCorbs]

Seem to remember this from last week? If not then very similar.

good memory

http://www.ukplumbersforums.co.uk/plumbing-forum/84264-20mm-sink-waste-outlet-conversion-either.html

 

[craigskelly]

Apologies for posting again but I didn't get any replies last week! My local plumbers recommended McAlpine but when I contacted them they said they couldn't help. I understood from the plumbers that this is a common issue (European size he told me) so I assumed that there must presumably be adapters out there somewhere. I didn't get anywhere with a regular internet search

 

[rpm]

Apologies for posting again but I didn't get any replies last week!/QUOTE]

Fair enough mate, most people just carry on the thread by asking "Anyone know" a few days later but each to their own.

 

[rpm]

Will it be on show or behind closed door(s)?

 

[craigskelly]

Thanks Pub Member - will do this next time. I have been looking again on the net and am drawing a blank. Not looking good so I think I may need to replace the trap with a conventionally sized pipe outlet which is a real pain - unless that is someone comes up with supplier!

 

[rpm]

Guessing you mean me, rpm not Pub Member (But never mind that).

Will it be on show or behind closed doors, have an idea but it wont look pretty but could buy you time.

 

[craigskelly]

Thanks Pub Member - will do this next time. I have been looking again on the net and am drawing a blank. Not looking good so I think I may need to replace the trap with a conventionally sized pipe outlet which is a real pain - unless that is someone comes up with supplier!

 

[craigskelly]

whoops - sorry RPM

 

[rpm]

whoops - sorry RPM

No worries.

 

[craigskelly]

So, I have a chrome trap with 20mm pipe feeding out through the wall so these would be on show. I was hoping to convert externally i.e. get a push fit to allow me to then connect into the stack.