Anyone fitted these problem I am finding is it does not close down enough for the thickness of the wall and cannot be cut they are not the same as a normal horizontal flue , phoned Valliant technical they said it is what it is not alot of help. Kop
I will start a heating upgrade on Monday removing a old glowworm boiler and upgrading the system from a y plan to a s plan , new pump , twin channel programmer , room stat , auto bypass , new Trv's and lockshields, am I right in thinking I will need a pump overrun facility for this boiler all...
Hi there I've got a Valliant echo plus 28 combi boiler and what I've noticed is that when I set the thermostat target to say 20 it keeps on going( not everytime tho) I changed the stat to a nest thinking that might be the problem but noticed that again when I set it to 20 I would look an hour...
A brand new valliant ecotec 618 boiler was installed less than 6 months old. We started experiencing no hot water from the 4th month. The only way to have hot water is by having both the heating and hot water switched on together. Given hot weather in the UK last week, we switched off the...
Hi Guys
Please would you be able to give your thoughts on this...
Last week had boiler serviced (its 4 years old) all ok afterwards until this morning, water was luke warm. Still luke warm after boiler has been on this evening.
Temp reading 48 degree on boiler (target set at 68 degrees)Water...
Hi everyone,
I had put in a Valliant combi with nest thermostat for the house with rads and all working and ok.
The client has just added a zonal ufh circuit. To the kitchen area.
Is there somewhere I can check with regards to wiring this all up?
I have put 2no zone valves in for each...
Hi all,
I have a Vaillant Ecotec Plus 418 boiler (standard boiler, not combi), but as of this morning my heating and hot water has stopped working, and I get the error message F22.
I believe this means the pressure is low and I've looked online, and it suggest I must use valves under the...
Hello everyone I'm new to the forum, I'm looking for some advice and piece of mind.
I want to plumb a hot water tap to my kitchen (combi system). Unfortunately I've had the kitchen plastered and I've now decided i want to move the position of the sink, without seriously damaging the nice new...
Hi - I have a Vallian Echotech Pro24 boiler with low pressure and F.22 error displaying. Ive researched how to repressurise and a lot of video/ threads suggest this should be straight forward however there is no flex-loop, no obvious places to attached a flex-loop and no valve taps as described...
Hi all, is it possible to still source a 100mm u bend flue fitting for one of these boilers? I am told that as there is some slight surface corroding that it needs replacing and also told they are not available anymore..only option is a complete new boiler which I simply cannot do at this time...
I'm not familiar with either but I've been asked to update controls on a Vaillant combi system, client hasn't asked for weather comp but I'd like to offer it, are there any issues with either?
How to switch comfort mode off on a Valliant ecoTec pro28.
only found instructions on how to do it on different models and not this one.
Please see attachment. I have the following buttons: turn off flame, Info, - (minus), and +(plus).
Thanks you.
Our boiler/pump has been making a strange pulsating noise for a while now. I've uploaded a video here:
https://youtu.be/joe6JuFu4bk
It's a Valliant Ecotec plus boiler and a Grundfos alpha+ pump. The boiler works fine still but the noise can be overpowering.
Any advice? Do you think a new...
OurRich
Thread
advice
boiler
ecotec
labour
noise
oil
pump
sounds
still
valliant
Hello,
Can anyone tell me how to refill the water in this type of boiler?
Thanks
http://s22.postimg.org/69wg5j841/20160229_052714.jpg
http://s29.postimg.org/l9rvm4ax3/20160229_052720.jpg
Hi,
This boiler leaks from a leak off pipe attached to the siphonic condensing trap. This leak (drip) only occurs when heating switched on. The expansion unit was faulty which i have replaced. The trap was dirty and over filled which i have cleaned and filled to correct level.
There is a smaller...
Rixy
Thread
boiler
ecotec
ecotec plus
ecotec plus 837
leak
oil
plus
valliant
Valliant ecotec plus 837 losing pressure every few days. Boiler in loft with flue venting outside to house apex. Boiler 2 years old. Forgot to look at error message this morning so unsure of error message but when filled from two taps underneath it can last 2-3 days without losing pressure...
HGF69
Thread
boiler
closed
ecotec
ecotec plus
ecotec plus 837
error
helpful
losing
plus
pressure
valliant
Short question: Can I swap out a Valliant 360F controller with a 350F? Are they interchangeable?
Background: My Valliant 360F thermostat device has recently started misbehaving and I think there may be an issue with the board. Turning the dial only decreases values, not both increasing and...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.