hi all,
am pricing up a job but want to use the existing controls - im not very good with controls and just wanted to check that an ACL Lifestyle LPS 22 and standard drayton room stat would be compatible with the above boiler
appreciate your responses.
Cheers
Hi everyone,I have a strange problem with my boiler, it works fine for a while then stops completely, it's supposed to come on when i put the hot water tap on also the shower but sometimes it doesn't until I completely kill the power to the boiler by tripping it out on the master fuse box, once...
directed at any valliant service tech,s or plumbers. on the above boiler , fires up and immedieately the heating flow pipe warms then gets very VERY hot while the return to boiler stays cold ! soon after the boiler stat climbs to 100C then blows off and cuts out. My 1st thought was diverter...
My 18year old Potterton Profile 60e is coming to the end of its life and I need to replace it with a condensing boiler. I have an open vented system and underfloor heating with two "zone Packs" incorporating a thermostatic mixing valve and pump serving a four bedroom bunglalow with a bathroom...
Last Thursday morning our Valliant Ecomax vU186EH boiler just stopped working with F.21 showing on the display.
Pressing the reset switch would NOT reset it- it was dead to the world.
Valliant engineer came out this morning- replaced the PCB- boiler fired and stayed on. Yet a few hours later...
IDN101
Thread
again
boiler
code
ecomax
fault
keeps
morning
oil
reset
valliant
Boiler fires up for afew seconds when any cold water tap is run. This has happened since cust removed a small cloak rad. I assume the aqua sensor is picking up movement of water , can it be triggered if there is backflow/reversed flow. Boiler is 8 yrs old . Incoming pressure is 3.5 bar. Any ideas
Currently I am in the process of replacing my old boiler with new one. However I am stuck with the decision to decide between a valliant ecotec 837 combi boiler and megaflow system. which is a better one ? My property is a detached 4 bed property with 2 showers and 2 toilets with 8 rads in the...
ranjeett
Thread
boiler
combi
combi boiler
ecotec
megaflow
oil
system
valliant
hi all i just installed a 624 system boiler on to an existing un vented cylinder and used the new rf programmer and stat by valliant but i have no way of interfacing with the three port and two port valves plus tank stats i rang technical and they said the only way was to change it to two ports...
I've got a problem with a customer's Vallient Tubo Max 242/ie. Basically its loosing pressure gradually. when i've gone and had a look and repressurised the system I've noticed that when dhw is drawn off the sink tape, the needle on the gauge jumps up slightly then settles down at a lower...
Gary Carey
Thread
drop
pressure
pressure drop
problem
turbo
valliant
Dear all just about to have a new heat only boiler fitted in three bed house (old house no cavity) one main bathroom and one on-suite about 9 rads in total.
Got an installer I trust, he is wiesmann trained and has fitted 30 last year without any call backs but is happy to fit whatever I want...
wildhorses
Thread
about
boiler
bosch
heat
heat only
oil
spares
system
valliant
worcester
worcester bosch
I am having a problem with the boiler when after running for approx 45mins and the house is approaching temperature that the boler will start cycling (switching off and then back on again after approx 1 min)
I have detailed what is happening and used the Valliant codes. I have a weather...
I'm in the process of getting quotes for a new combi boiler. Engineer No. 1 has quoted for Worcester si30 and No. 2 for a Valliant protec 28. Any thoughts on which is best? I know both makes are regularly fitted.
Hi
trying to get the boiler working in my camper van, seems to be a very simple boiler, but i still can not get it to fire up ...
I have the pilot light working and have changed the diaphragm and top housing so it is now leak free.
But the boiler will not fire ..
I have the water pressure...
Hi, can anybody help with me choosing a programmer for the said boiler, I have read that Honeywell do a great user friendly programmer, yet other advice is that the Valliant programmers connect to the boiler and monitor the temperatures etc more efficiently. Does anyone know how good these...
purplehazze
Thread
boiler
choice
ecotec
ecotec plus
honeywell
plus
programmer
vaillant
valliant
wired
Evening all,
Tomorrow Im connecting an s plan heating system with a valliant boiler. ive followed the diagram and its nearly all connected from the octaveblue webiste. ive run a 5 core from connection box to boiler. i looked in manual and it shows the link still connected on 3 and 4 for the...
Hello all,
Could really do with some advice as am completley stuck! Today I have installed a valliant ecoplus 428 boiler, and despite trying everything I can think of can not seem to get the wiring right. This has not been helped by the fact I get no phone reception in the house and have to...
Hi folks, new on here but been reading the forums as a guest with great interest....
Am about to replace the boiler in our new house and was hoping for some insight into possible options. Am looking at a "heat only" boiler (rest of system good with recent new DHW cylinder so replacing archaic...
TasMan
Thread
boiler
cylinder
house
new boiler
oil
perhaps
remeha
valliant
viessmann
We to service a Valliant Combi. customer has no manual thought may be able to download, but can not find model name or number. Any help would be appreciated. I am GSR registered
Please see attachments
Thanks
Hey up all,
happy mothers day :confused:
Anyone stripped out a water section on one of these?
Got a siezed water temp control knob for a good customer and would like to strip it out for him and replace diaphragm while im there and change washers etc etc.
As its nearly £100 for a new section...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.